Skip to content

Changes

Page history
Update DPP2Lora authored by Andreas Biri's avatar Andreas Biri
Hide whitespace changes
Inline Side-by-side
Communication/DPP2Lora.md
View page @ 20a86da7
......@@ -16,6 +16,11 @@
Basic code examples can be found in our [repository](https://gitlab.ethz.ch/tec/public/dpp/tree/master/software/com/stm32l4_sx1262).
## Power profiling
**DevBoard:** Notice that when using this ComBoard together with the [DPP DevBoard](https://gitlab.ethz.ch/tec/research/dpp/hardware/pcb/app_devboard), `BOLT_VCC` (VCC Select Pin 6) and `COM_VCC` (VCC Select Pin 8) are connected on the board. Therefore, for power measurements of the ComBoard, _both_ jumpers must be disconnected.
**FlockLab:** The boards that are available as targets on FlockLab (`DPP2LoRa` and `DPP2LoRaHG`) have the resistor `R200` (see [schematic](https://gitlab.ethz.ch/tec/research/dpp/hardware/pcb/com_lora/blob/master/outputs/DPP2_ComBoard_LoRa_rev_1.PDF)) placed with a 220 Ohm part (measured on a single board). Therefore, it is essential that Pin _PB.3_ is not left floating, as this can lead to significant observable leakage currents up to 50mA.
## Pin mapping (STM32L433)
......