Skip to content
Snippets Groups Projects
Select Git revision
  • main default protected
  • V0.1
2 results
Blame Permalink
user_manual.md 1.84 KiB

Introduction

This software documentation provides a comprehensive guide for using the MiniMOKE setup with this software.

This software allows for magnetic field ramping, x-position sweeps and/or y-position sweeps, enabling measurements in DC and AC using its own Lockin demodulation algorithm.

User Interface Breakdown

The user interface of the software is designed to be intuitive and user-friendly. It provides easy access to the various features and functionalities required for performing measurements with the miniMOKE setup. The main components of the user interface are as follows:

  • Experiment tabs: located on the left, the measurement tabs allow the user to define all the parameters for each experiment types.
  • Experiment launcher: located on the bottom-left, this area allow the user to define the output folder and the sample name and to queue one or many experiments.
  • Main tabs: the main features of the software
    • User Manual tab: this user manual
    • Motor control tab: manually move the 3D stage axis by axis or directly go to a given position
    • Live Measurements tab: view the live values (if no experiment is running) of the Hall probe, the intensity diode and the balanced diodes.
    • Result graph tab: visualize in live the measurements of each experiment with the possiblity to choose the x and y data of the plot
    • Experiment log: see what happens and what happened thanks to the log. This can be usefull for instance if an experiment failed.
  • Experiment queue: located in the bottom, allow the user to select which experiment to plot and to check the status of each experiment.
  • Status bar: located on the very bottom, see the last line from the logs
Interface Screenshot 01

Take a Measurement

To take a measurement using the software, follow these steps:

  • Select