PickerControllerService.cpp 61.8 KB
Newer Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
//    Copyright (C) 2017, ETH Zurich, D-ITET, Paul Beuchat, Angel Romero, Cyrill Burgener, Marco Mueller, Philipp Friedli
//
//    This file is part of D-FaLL-System.
//    
//    D-FaLL-System is free software: you can redistribute it and/or modify
//    it under the terms of the GNU General Public License as published by
//    the Free Software Foundation, either version 3 of the License, or
//    (at your option) any later version.
//    
//    D-FaLL-System is distributed in the hope that it will be useful,
//    but WITHOUT ANY WARRANTY; without even the implied warranty of
//    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
//    GNU General Public License for more details.
//    
//    You should have received a copy of the GNU General Public License
//    along with D-FaLL-System.  If not, see <http://www.gnu.org/licenses/>.
//    
//
//    ----------------------------------------------------------------------------------
//    DDDD        FFFFF        L     L           SSSS  Y   Y   SSSS  TTTTT  EEEEE  M   M
//    D   D       F      aaa   L     L          S       Y Y   S        T    E      MM MM
//    D   D  ---  FFFF  a   a  L     L     ---   SSS     Y     SSS     T    EEE    M M M
//    D   D       F     a  aa  L     L              S    Y        S    T    E      M   M
//    DDDD        F      aa a  LLLL  LLLL       SSSS     Y    SSSS     T    EEEEE  M   M
//
//
//    DESCRIPTION:
//    Place for students to implement their controller
//
//    ----------------------------------------------------------------------------------





// INCLUDE THE HEADER
#include "nodes/PickerControllerService.h"





//    ----------------------------------------------------------------------------------
//    FFFFF  U   U  N   N   CCCC  TTTTT  III   OOO   N   N
//    F      U   U  NN  N  C        T     I   O   O  NN  N
//    FFF    U   U  N N N  C        T     I   O   O  N N N
//    F      U   U  N  NN  C        T     I   O   O  N  NN
//    F       UUU   N   N   CCCC    T    III   OOO   N   N
//
//    III M   M PPPP  L     EEEEE M   M EEEEE N   N TTTTT   A   TTTTT III  OOO  N   N
//     I  MM MM P   P L     E     MM MM E     NN  N   T    A A    T    I  O   O NN  N
//     I  M M M PPPP  L     EEE   M M M EEE   N N N   T   A   A   T    I  O   O N N N
//     I  M   M P     L     E     M   M E     N  NN   T   AAAAA   T    I  O   O N  NN
//    III M   M P     LLLLL EEEEE M   M EEEEE N   N   T   A   A   T   III  OOO  N   N
//    ----------------------------------------------------------------------------------




// REMINDER OF THE NAME OF USEFUL CLASS VARIABLE
// // Current time
// float m_time_seconds;
// // > Mass of the Crazyflie quad-rotor, in [grams]
// float m_mass_CF_grams;
// // > Mass of the letters to be lifted, in [grams]
// float m_mass_E_grams;
// float m_mass_T_grams;
// float m_mass_H_grams;
// // > Total mass of the Crazyflie plus whatever it is carrying, in [grams]
// float m_mass_total_grams;
// // (x,y) coordinates of the pickup location
// float m_pickup_coordinates_xy[2];
// // (x,y) coordinates of the drop off location
// float m_dropoff_coordinates_xy_for_E[2];
// float m_dropoff_coordinates_xy_for_T[2];
// float m_dropoff_coordinates_xy_for_H[2];
// // > The setpoints for (x,y,z) position and yaw angle, in that order
// float m_setpoint[4];
// // > Small adjustments to the x-y setpoint
// float m_xAdjustment;
// float m_yAdjustment;




86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
void perControlCycleOperations()
{
	if (m_shouldSmoothSetpointChanges)
	{
		for(int i = 0; i < 4; ++i)
		{
			float max_for_this_coordinate;
			// FILLE IN THE STATE INERTIAL ESTIMATE TO BE USED FOR CONTROL
			switch (i)
			{
				case 0:
					max_for_this_coordinate = m_max_setpoint_change_per_second_horizontal / vicon_frequency;
					break;
				case 1:
					max_for_this_coordinate = m_max_setpoint_change_per_second_horizontal / vicon_frequency;
					break;
				case 2:
					max_for_this_coordinate = m_max_setpoint_change_per_second_vertical / vicon_frequency;
					break;
				case 3:
					max_for_this_coordinate = m_max_setpoint_change_per_second_yaw_radians / vicon_frequency;
					break;
				// Handle the exception
				default:
					max_for_this_coordinate = 0.0f;
					break;
			}

			// Compute the difference in setpoint
			float setpoint_difference = m_setpoint[i] - m_setpoint_for_controller[i];

			// Clip the difference to the maximum
			if (setpoint_difference > max_for_this_coordinate)
			{
				setpoint_difference = max_for_this_coordinate;
			}
			else if (setpoint_difference < -max_for_this_coordinate)
			{
				setpoint_difference = -max_for_this_coordinate;
			}

			// Update the setpoint of the controller
			m_setpoint_for_controller[i] += setpoint_difference;
		}
		
	}
	else
	{
		m_setpoint_for_controller[0] = m_setpoint[0];
		m_setpoint_for_controller[1] = m_setpoint[1];
		m_setpoint_for_controller[2] = m_setpoint[2];
		m_setpoint_for_controller[3] = m_setpoint[3];
	}
}






146
147
148
149

void buttonPressed_gotoStart()
{
	ROS_INFO("[PICKER CONTROLLER] Goto Start button pressed");
150

151
	m_shouldSmoothSetpointChanges = true;
152
153
	m_setpoint[0] = m_pickup_coordinates_xy[0];
	m_setpoint[1] = m_pickup_coordinates_xy[1];
154
	m_setpoint[2] = m_picker_string_length + 0.15;
155
	publishCurrentSetpoint();
156
157
158
159
160
}

void buttonPressed_connect()
{
	ROS_INFO("[PICKER CONTROLLER] Connect button pressed");
161

162
163
	m_shouldSmoothSetpointChanges = true;
	m_setpoint[2] = m_picker_string_length + m_thickness_of_object_at_pickup;
164
	publishCurrentSetpoint();
165
166
167
168
169
}

void buttonPressed_pickup()
{
	ROS_INFO("[PICKER CONTROLLER] Pick up button pressed");
170

171
	m_shouldSmoothSetpointChanges = true;
172
	m_mass_total_grams = m_mass_CF_grams + m_mass_E_grams;
173
	m_setpoint[2] = m_picker_string_length + 0.25;
174
	publishCurrentSetpoint();
175
}
176

177
178
179
void buttonPressed_gotoEnd()
{
	ROS_INFO("[PICKER CONTROLLER] Goto End button pressed");
180

181
	m_shouldSmoothSetpointChanges = true;
182
183
184
	m_setpoint[0] = m_dropoff_coordinates_xy_for_E[0];
	m_setpoint[1] = m_dropoff_coordinates_xy_for_E[1];
	publishCurrentSetpoint();
185
186
187
188
189
}	

void buttonPressed_putdown()
{
	ROS_INFO("[PICKER CONTROLLER] Put down button pressed");
190

191
192
193
194
195
196
197
198
199
200
201
202
	m_shouldSmoothSetpointChanges = true;
	m_setpoint[2] = m_picker_string_length + m_thickness_of_object_at_putdown;
	m_mass_total_grams = m_mass_CF_grams;
	publishCurrentSetpoint();
}

void buttonPressed_squat()
{
	ROS_INFO("[PICKER CONTROLLER] Squat button pressed");

	m_shouldSmoothSetpointChanges = true;
	m_setpoint[2] = m_picker_string_length - 0.10;
203
204
	m_mass_total_grams = m_mass_CF_grams;
	publishCurrentSetpoint();
205
206
207
208
209
}

void buttonPressed_disconnect()
{
	ROS_INFO("[PICKER CONTROLLER] Disconnect button pressed");
210

211
	m_shouldSmoothSetpointChanges = false;
212
213
214
	m_setpoint[2] = m_picker_string_length + 0.15;
	m_mass_total_grams = m_mass_CF_grams;
	publishCurrentSetpoint();
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
}

void buttonPressed_1()
{
	ROS_INFO("[PICKER CONTROLLER] Button 1 pressed");
}
void buttonPressed_2()
{
	ROS_INFO("[PICKER CONTROLLER] Button 2 pressed");
}

void buttonPressed_3()
{
	ROS_INFO("[PICKER CONTROLLER] Button 3 pressed");
}

void buttonPressed_4()
{
	ROS_INFO("[PICKER CONTROLLER] Button 4 pressed");
}










void zSetpointCallback(const std_msgs::Float32& msg)
{
	// The "data" in the message is z-height in [meters]
	float z_height = msg.data;
	// Display the data
	ROS_INFO_STREAM("[PICKER CONTROLLER] Z Slider changed to " << z_height << " [m]" );
	// Update the z-component of the setpoint class variable
	m_setpoint[2] = z_height;
}


void yawSetpointCallback(const std_msgs::Float32& msg)
{
	// The "data" in the message is yaw-angle in [radians]
	float yaw_angle = msg.data;
	// Display the data
	ROS_INFO_STREAM("[PICKER CONTROLLER] Yaw Dial changed to " << (yaw_angle*RAD2DEG) << " [deg]" );
	// Update the yaw-component of the setpoint class variable
	m_setpoint[3] = yaw_angle;
}

void massCallback(const std_msgs::Float32& msg)
{
	// The "data" in the message is mass in [grams]
	float mass = msg.data;
	// Display the data
	ROS_INFO_STREAM("[PICKER CONTROLLER] Mass slider changed to " << mass << " [grams]" );
	// Update the total mass class variable
	m_mass_total_grams = mass;
}

void xAdjustmentCallback(const std_msgs::Float32& msg)
{
	// The "data" in the message is adjustment in [meters]
	float x_adjustment = msg.data;
	// Display the data
	ROS_INFO_STREAM("[PICKER CONTROLLER] X adjustment slider changed to " << x_adjustment << " [m]" );
	// Update the x-adjustment class variable
	m_xAdjustment = x_adjustment;
}

void yAdjustmentCallback(const std_msgs::Float32& msg)
{
	// The "data" in the message is adjustment in [meters]
	float y_adjustment = msg.data;
	// Display the data
	ROS_INFO_STREAM("[PICKER CONTROLLER] Y adjustment slider changed to " << y_adjustment << " [m]" );
	// Update the y-adjustment class variable
	m_yAdjustment = y_adjustment;
}















//    ------------------------------------------------------------------------------
//     OOO   U   U  TTTTT  EEEEE  RRRR 
//    O   O  U   U    T    E      R   R
//    O   O  U   U    T    EEE    RRRR
//    O   O  U   U    T    E      R  R
//     OOO    UUU     T    EEEEE  R   R
//
//     CCCC   OOO   N   N  TTTTT  RRRR    OOO   L           L       OOO    OOO   PPPP
//    C      O   O  NN  N    T    R   R  O   O  L           L      O   O  O   O  P   P
//    C      O   O  N N N    T    RRRR   O   O  L           L      O   O  O   O  PPPP
//    C      O   O  N  NN    T    R  R   O   O  L           L      O   O  O   O  P
//     CCCC   OOO   N   N    T    R   R   OOO   LLLLL       LLLLL   OOO    OOO   P
//    ----------------------------------------------------------------------------------

// This function is the callback that is linked to the "PickerController" service that
// is advertised in the main function. This must have arguments that match the
// "input-output" behaviour defined in the "Controller.srv" file (located in the "srv"
// folder)
//
// The arument "request" is a structure provided to this service with the following two
// properties:
// request.ownCrazyflie
// This property is itself a structure of type "CrazyflieData",  which is defined in the
// file "CrazyflieData.msg", and has the following properties
// string crazyflieName
//     float64 x                         The x position of the Crazyflie [metres]
//     float64 y                         The y position of the Crazyflie [metres]
//     float64 z                         The z position of the Crazyflie [metres]
//     float64 roll                      The roll component of the intrinsic Euler angles [radians]
//     float64 pitch                     The pitch component of the intrinsic Euler angles [radians]
//     float64 yaw                       The yaw component of the intrinsic Euler angles [radians]
//     float64 acquiringTime #delta t    The time elapsed since the previous "CrazyflieData" was received [seconds]
//     bool occluded                     A boolean indicted whether the Crazyflie for visible at the time of this measurement
// The values in these properties are directly the measurement taken by the Vicon
// motion capture system of the Crazyflie that is to be controlled by this service
//
// request.otherCrazyflies
// This property is an array of "CrazyflieData" structures, what allows access to the
// Vicon measurements of other Crazyflies.
//
// The argument "response" is a structure that is expected to be filled in by this
// service by this function, it has only the following property
// response.ControlCommand
// This property is iteself a structure of type "ControlCommand", which is defined in
// the file "ControlCommand.msg", and has the following properties:
//     float32 roll                      The command sent to the Crazyflie for the body frame x-axis
//     float32 pitch                     The command sent to the Crazyflie for the body frame y-axis
//     float32 yaw                       The command sent to the Crazyflie for the body frame z-axis
//     uint16 motorCmd1                  The command sent to the Crazyflie for motor 1
//     uint16 motorCmd2                  The command sent to the Crazyflie for motor 1
//     uint16 motorCmd3                  The command sent to the Crazyflie for motor 1
//     uint16 motorCmd4                  The command sent to the Crazyflie for motor 1
//     uint8 onboardControllerType       The flag sent to the Crazyflie for indicating how to implement the command
// 
// IMPORTANT NOTES FOR "onboardControllerType"  AND AXIS CONVENTIONS
// > The allowed values for "onboardControllerType" are in the "Defines" section at the
//   top of this file, they are:
//   CF_COMMAND_TYPE_MOTOR
//   CF_COMMAND_TYPE_RATE
//   CF_COMMAND_TYPE_ANGLE.
// > With CF_COMMAND_TYPE_RATE the ".roll", ".ptich", and ".yaw" properties of "response.ControlCommand"
//   specify the angular rate in [radians/second] that will be requested from the
//   PID controllers running in the Crazyflie 2.0 firmware.
// > With CF_COMMAND_TYPE_RATE the ".motorCmd1" to ".motorCmd4" properties of "response.ControlCommand"
//   are the baseline motor commands requested from the Crazyflie, with the adjustment
//   for body rates being added on top of this in the firmware (i.e., as per the code
//   of the "distribute_power" function provided in exercise sheet 2).
// > With CF_COMMAND_TYPE_RATE the axis convention for the roll, pitch, and yaw body rates returned
//   in "response.ControlCommand" should use right-hand coordinate axes with x-forward
//   and z-upwards (i.e., the positive z-axis is aligned with the direction of positive
//   thrust). To assist, teh following is an ASCII art of this convention:
//
// ASCII ART OF THE CRAZYFLIE 2.0 LAYOUT
//
//  > This is a top view,
//  > M1 to M4 stand for Motor 1 to Motor 4,
//  > "CW"  indicates that the motor rotates Clockwise,
//  > "CCW" indicates that the motor rotates Counter-Clockwise,
//  > By right-hand axis convention, the positive z-direction points our of the screen,
//  > This being a "top view" means tha the direction of positive thrust produced
//    by the propellers is also out of the screen.
//
//        ____                         ____
//       /    \                       /    \
//  (CW) | M4 |           x           | M1 | (CCW)
//       \____/\          ^          /\____/
//            \ \         |         / /
//             \ \        |        / /
//              \ \______ | ______/ /
//               \        |        /
//                |       |       |
//        y <-------------o       |
//                |               |
//               / _______________ \
//              / /               \ \
//             / /                 \ \
//        ____/ /                   \ \____
//       /    \/                     \/    \
// (CCW) | M3 |                       | M2 | (CW)
//       \____/                       \____/
//
//
//
// This function WILL NEED TO BE edited for successful completion of the PPS exercise
bool calculateControlOutput(Controller::Request &request, Controller::Response &response)
{

	// Keep track of time
	m_time_ticks++;
	m_time_seconds = float(m_time_ticks) / vicon_frequency;

421
422
423
424

	// CALL THE FUNCTION FOR PER CYLCE OPERATIONS
	perControlCycleOperations();

425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
	// THIS IS THE START OF THE "OUTER" CONTROL LOOP
	// > i.e., this is the control loop run on this laptop
	// > this function is called at the frequency specified
	// > this function performs all estimation and control


	// PERFORM THE ESTIMATOR UPDATE FOR THE INTERIAL FRAME STATE
	// > After this function is complete the class variable
	//   "current_stateInertialEstimate" is updated and ready
	//   to be used for subsequent controller copmutations
	performEstimatorUpdate_forStateInterial(request);

	
	// CONVERT THE CURRENT INERTIAL FRAME STATE ESTIMATE, INTO
	// THE BODY FRAME ERROR REQUIRED BY THE CONTROLLER
	// > Define a local array to fill in with the body frame error
	float current_bodyFrameError[12];
	// > Call the function to perform the conversion
443
	convert_stateInertial_to_bodyFrameError(current_stateInertialEstimate,m_setpoint_for_controller,current_bodyFrameError);
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832

	

	// CARRY OUT THE CONTROLLER COMPUTATIONS
	// Call the function that performs the control computations for this mode
	calculateControlOutput_viaLQRforRates(current_bodyFrameError,request,response);



	// PUBLISH THE CURRENT X,Y,Z, AND YAW (if required)
	if (shouldPublishCurrent_xyz_yaw)
	{
		publish_current_xyz_yaw(request.ownCrazyflie.x,request.ownCrazyflie.y,request.ownCrazyflie.z,request.ownCrazyflie.yaw);
	}

	// PUBLISH THE DEBUG MESSAGE (if required)
	if (shouldPublishDebugMessage)
	{
		construct_and_publish_debug_message(request,response);
	}

	// RETURN "true" TO INDICATE THAT THE COMPUTATIONS WERE SUCCESSFUL
	return true;
}




//    ------------------------------------------------------------------------------
//    EEEEE   SSSS  TTTTT  III  M   M    A    TTTTT  III   OOO   N   N
//    E      S        T     I   MM MM   A A     T     I   O   O  NN  N
//    EEE     SSS     T     I   M M M  A   A    T     I   O   O  N N N
//    E          S    T     I   M   M  AAAAA    T     I   O   O  N  NN
//    EEEEE  SSSS     T    III  M   M  A   A    T    III   OOO   N   N
//    ------------------------------------------------------------------------------
void performEstimatorUpdate_forStateInterial(Controller::Request &request)
{

	// PUT THE CURRENT MEASURED DATA INTO THE CLASS VARIABLE
	// > for (x,y,z) position
	current_xzy_rpy_measurement[0] = request.ownCrazyflie.x;
	current_xzy_rpy_measurement[1] = request.ownCrazyflie.y;
	current_xzy_rpy_measurement[2] = request.ownCrazyflie.z;
	// > for (roll,pitch,yaw) angles
	current_xzy_rpy_measurement[3] = request.ownCrazyflie.roll;
	current_xzy_rpy_measurement[4] = request.ownCrazyflie.pitch;
	current_xzy_rpy_measurement[5] = request.ownCrazyflie.yaw;


	// RUN THE FINITE DIFFERENCE ESTIMATOR
	performEstimatorUpdate_forStateInterial_viaFiniteDifference();


	// RUN THE POINT MASS KALMAN FILTER ESTIMATOR
	performEstimatorUpdate_forStateInterial_viaPointMassKalmanFilter();


	// FILLE IN THE STATE INERTIAL ESTIMATE TO BE USED FOR CONTROL
	switch (estimator_method)
	{
		// Estimator based on finte differences
		case ESTIMATOR_METHOD_FINITE_DIFFERENCE:
		{
			// Transfer the estimate
			for(int i = 0; i < 12; ++i)
			{
				current_stateInertialEstimate[i]  = stateInterialEstimate_viaFiniteDifference[i];
			}
			break;
		}
		// Estimator based on Point Mass Kalman Filter
		case ESTIMATOR_METHOD_POINT_MASS_PER_DIMENSION:
		{
			// Transfer the estimate
			for(int i = 0; i < 12; ++i)
			{
				current_stateInertialEstimate[i]  = stateInterialEstimate_viaPointMassKalmanFilter[i];
			}
			break;
		}
		// Handle the exception
		default:
		{
			// Display that the "estimator_method" was not recognised
			ROS_INFO_STREAM("[PICKER CONTROLLER] ERROR: in the 'calculateControlOutput' function of the 'PickerControllerService': the 'estimator_method' is not recognised.");
			// Transfer the finite difference estimate by default
			for(int i = 0; i < 12; ++i)
			{
				current_stateInertialEstimate[i]  = stateInterialEstimate_viaFiniteDifference[i];
			}
			break;
		}
	}


	// NOW THAT THE ESTIMATORS HAVE ALL BEEN RUN, PUT THE CURRENT
	// MEASURED DATA INTO THE CLASS VARIABLE FOR THE PREVIOUS 
	// > for (x,y,z) position
	previous_xzy_rpy_measurement[0] = current_xzy_rpy_measurement[0];
	previous_xzy_rpy_measurement[1] = current_xzy_rpy_measurement[1];
	previous_xzy_rpy_measurement[2] = current_xzy_rpy_measurement[2];
	// > for (roll,pitch,yaw) angles
	previous_xzy_rpy_measurement[3] = current_xzy_rpy_measurement[3];
	previous_xzy_rpy_measurement[4] = current_xzy_rpy_measurement[4];
	previous_xzy_rpy_measurement[5] = current_xzy_rpy_measurement[5];
}



void performEstimatorUpdate_forStateInterial_viaFiniteDifference()
{
	// PUT IN THE CURRENT MEASUREMENT DIRECTLY
	// > for (x,y,z) position
	stateInterialEstimate_viaFiniteDifference[0]  = current_xzy_rpy_measurement[0];
	stateInterialEstimate_viaFiniteDifference[1]  = current_xzy_rpy_measurement[1];
	stateInterialEstimate_viaFiniteDifference[2]  = current_xzy_rpy_measurement[2];
	// > for (roll,pitch,yaw) angles
	stateInterialEstimate_viaFiniteDifference[6]  = current_xzy_rpy_measurement[3];
	stateInterialEstimate_viaFiniteDifference[7]  = current_xzy_rpy_measurement[4];
	stateInterialEstimate_viaFiniteDifference[8]  = current_xzy_rpy_measurement[5];

	// COMPUTE THE VELOCITIES VIA FINITE DIFFERENCE
	// > for (x,y,z) velocities
	stateInterialEstimate_viaFiniteDifference[3]  = (current_xzy_rpy_measurement[0] - previous_xzy_rpy_measurement[0]) * estimator_frequency;
	stateInterialEstimate_viaFiniteDifference[4]  = (current_xzy_rpy_measurement[1] - previous_xzy_rpy_measurement[1]) * estimator_frequency;
	stateInterialEstimate_viaFiniteDifference[5]  = (current_xzy_rpy_measurement[2] - previous_xzy_rpy_measurement[2]) * estimator_frequency;
	// > for (roll,pitch,yaw) velocities
	stateInterialEstimate_viaFiniteDifference[9]  = (current_xzy_rpy_measurement[3] - previous_xzy_rpy_measurement[3]) * estimator_frequency;
	stateInterialEstimate_viaFiniteDifference[10] = (current_xzy_rpy_measurement[4] - previous_xzy_rpy_measurement[4]) * estimator_frequency;
	stateInterialEstimate_viaFiniteDifference[11] = (current_xzy_rpy_measurement[5] - previous_xzy_rpy_measurement[5]) * estimator_frequency;
}



void performEstimatorUpdate_forStateInterial_viaPointMassKalmanFilter()
{
	// PERFORM THE KALMAN FILTER UPDATE STEP
	// > First take a copy of the estimator state
	float temp_PMKFstate[12];
	for(int i = 0; i < 12; ++i)
	{
		temp_PMKFstate[i]  = stateInterialEstimate_viaPointMassKalmanFilter[i];
	}
	// > Now perform update for:
	// > x position and velocity:
	stateInterialEstimate_viaPointMassKalmanFilter[0] = PMKF_Ahat_row1_for_positions[0]*temp_PMKFstate[0] + PMKF_Ahat_row1_for_positions[1]*temp_PMKFstate[3] + PMKF_Kinf_for_positions[0]*current_xzy_rpy_measurement[0];
	stateInterialEstimate_viaPointMassKalmanFilter[3] = PMKF_Ahat_row2_for_positions[0]*temp_PMKFstate[0] + PMKF_Ahat_row2_for_positions[1]*temp_PMKFstate[3] + PMKF_Kinf_for_positions[1]*current_xzy_rpy_measurement[0];
	// > y position and velocity:
	stateInterialEstimate_viaPointMassKalmanFilter[1] = PMKF_Ahat_row1_for_positions[0]*temp_PMKFstate[1] + PMKF_Ahat_row1_for_positions[1]*temp_PMKFstate[4] + PMKF_Kinf_for_positions[0]*current_xzy_rpy_measurement[1];
	stateInterialEstimate_viaPointMassKalmanFilter[4] = PMKF_Ahat_row2_for_positions[0]*temp_PMKFstate[1] + PMKF_Ahat_row2_for_positions[1]*temp_PMKFstate[4] + PMKF_Kinf_for_positions[1]*current_xzy_rpy_measurement[1];
	// > z position and velocity:
	stateInterialEstimate_viaPointMassKalmanFilter[2] = PMKF_Ahat_row1_for_positions[0]*temp_PMKFstate[2] + PMKF_Ahat_row1_for_positions[1]*temp_PMKFstate[5] + PMKF_Kinf_for_positions[0]*current_xzy_rpy_measurement[2];
	stateInterialEstimate_viaPointMassKalmanFilter[5] = PMKF_Ahat_row2_for_positions[0]*temp_PMKFstate[2] + PMKF_Ahat_row2_for_positions[1]*temp_PMKFstate[5] + PMKF_Kinf_for_positions[1]*current_xzy_rpy_measurement[2];

	// > roll  position and velocity:
	stateInterialEstimate_viaPointMassKalmanFilter[6]  = PMKF_Ahat_row1_for_angles[0]*temp_PMKFstate[6] + PMKF_Ahat_row1_for_angles[1]*temp_PMKFstate[9]  + PMKF_Kinf_for_angles[0]*current_xzy_rpy_measurement[3];
	stateInterialEstimate_viaPointMassKalmanFilter[9]  = PMKF_Ahat_row2_for_angles[0]*temp_PMKFstate[6] + PMKF_Ahat_row2_for_angles[1]*temp_PMKFstate[9]  + PMKF_Kinf_for_angles[1]*current_xzy_rpy_measurement[3];
	// > pitch position and velocity:
	stateInterialEstimate_viaPointMassKalmanFilter[7]  = PMKF_Ahat_row1_for_angles[0]*temp_PMKFstate[7] + PMKF_Ahat_row1_for_angles[1]*temp_PMKFstate[10] + PMKF_Kinf_for_angles[0]*current_xzy_rpy_measurement[4];
	stateInterialEstimate_viaPointMassKalmanFilter[10] = PMKF_Ahat_row2_for_angles[0]*temp_PMKFstate[7] + PMKF_Ahat_row2_for_angles[1]*temp_PMKFstate[10] + PMKF_Kinf_for_angles[1]*current_xzy_rpy_measurement[4];
	// > yaw   position and velocity:
	stateInterialEstimate_viaPointMassKalmanFilter[8]  = PMKF_Ahat_row1_for_angles[0]*temp_PMKFstate[8] + PMKF_Ahat_row1_for_angles[1]*temp_PMKFstate[11] + PMKF_Kinf_for_angles[0]*current_xzy_rpy_measurement[5];
	stateInterialEstimate_viaPointMassKalmanFilter[11] = PMKF_Ahat_row2_for_angles[0]*temp_PMKFstate[8] + PMKF_Ahat_row2_for_angles[1]*temp_PMKFstate[11] + PMKF_Kinf_for_angles[1]*current_xzy_rpy_measurement[5];
}





//    ----------------------------------------------------------------------------------
//    L       QQQ   RRRR
//    L      Q   Q  R   R
//    L      Q   Q  RRRR
//    L      Q  Q   R  R
//    LLLLL   QQ Q  R   R
//    ----------------------------------------------------------------------------------

void calculateControlOutput_viaLQRforRates(float stateErrorBody[12], Controller::Request &request, Controller::Response &response)
{
	// PERFORM THE "u=Kx" LQR CONTROLLER COMPUTATION

	// Instantiate the local variables for the following:
	// > body frame roll rate,
	// > body frame pitch rate,
	// > body frame yaw rate,
	// > total thrust adjustment.
	// These will be requested from the Crazyflie's on-baord "inner-loop" controller
	float rollRate_forResponse = 0;
	float pitchRate_forResponse = 0;
	float yawRate_forResponse = 0;
	float thrustAdjustment = 0;
	
	// Perform the "-Kx" LQR computation for the rates and thrust:
	for(int i = 0; i < 9; ++i)
	{
		// BODY FRAME Y CONTROLLER
		rollRate_forResponse  -= gainMatrixRollRate[i] * stateErrorBody[i];
		// BODY FRAME X CONTROLLER
		pitchRate_forResponse -= gainMatrixPitchRate[i] * stateErrorBody[i];
		// BODY FRAME YAW CONTROLLER
		yawRate_forResponse   -= gainMatrixYawRate[i] * stateErrorBody[i];
		// > ALITUDE CONTROLLER (i.e., z-controller):
		thrustAdjustment      -= gainMatrixThrust_NineStateVector[i] * stateErrorBody[i];
	}


	// UPDATE THE "RETURN" THE VARIABLE NAMED "response"

	// Put the computed rates and thrust into the "response" variable
	// > For roll, pitch, and yaw:
	response.controlOutput.roll  = rollRate_forResponse;
	response.controlOutput.pitch = pitchRate_forResponse;
	response.controlOutput.yaw   = yawRate_forResponse;
	// > For the thrust adjustment we must add the feed-forward thrust to counter-act gravity.
	// > NOTE: remember that the thrust is commanded per motor, so you sohuld
	//         consider whether the "thrustAdjustment" computed by your
	//         controller needed to be divided by 4 or not.
	thrustAdjustment = thrustAdjustment / 4.0;
	// > Compute the feed-forward force
	float feed_forward_thrust_per_motor = m_mass_total_grams * 9.81/(1000*4);
	// > Put in the per motor commands
	response.controlOutput.motorCmd1 = computeMotorPolyBackward(thrustAdjustment + feed_forward_thrust_per_motor);
	response.controlOutput.motorCmd2 = computeMotorPolyBackward(thrustAdjustment + feed_forward_thrust_per_motor);
	response.controlOutput.motorCmd3 = computeMotorPolyBackward(thrustAdjustment + feed_forward_thrust_per_motor);
	response.controlOutput.motorCmd4 = computeMotorPolyBackward(thrustAdjustment + feed_forward_thrust_per_motor);

	
	// Specify that this controller is a rate controller
	// response.controlOutput.onboardControllerType = CF_COMMAND_TYPE_MOTOR;
	response.controlOutput.onboardControllerType = CF_COMMAND_TYPE_RATE;
	// response.controlOutput.onboardControllerType = CF_COMMAND_TYPE_ANGLE;


	// An alternate debugging technique is to print out data directly to the
	// command line from which this node was launched.
	if (shouldDisplayDebugInfo)
	{
		// An example of "printing out" the data from the "request" argument to the
		// command line. This might be useful for debugging.
		ROS_INFO_STREAM("x-coordinate [m]: " << request.ownCrazyflie.x);
		ROS_INFO_STREAM("y-coordinate [m]: " << request.ownCrazyflie.y);
		ROS_INFO_STREAM("z-coordinate [m]: " << request.ownCrazyflie.z);
		ROS_INFO_STREAM("roll       [deg]: " << request.ownCrazyflie.roll);
		ROS_INFO_STREAM("pitch      [deg]: " << request.ownCrazyflie.pitch);
		ROS_INFO_STREAM("yaw        [deg]: " << request.ownCrazyflie.yaw);
		ROS_INFO_STREAM("Delta t      [s]: " << request.ownCrazyflie.acquiringTime);

		// An example of "printing out" the control actions computed.
		ROS_INFO_STREAM("thrustAdjustment = " << thrustAdjustment);
		ROS_INFO_STREAM("controlOutput.roll = " << response.controlOutput.roll);
		ROS_INFO_STREAM("controlOutput.pitch = " << response.controlOutput.pitch);
		ROS_INFO_STREAM("controlOutput.yaw = " << response.controlOutput.yaw);

		// An example of "printing out" the "thrust-to-command" conversion parameters.
		ROS_INFO_STREAM("motorPoly 0:" << motorPoly[0]);
		ROS_INFO_STREAM("motorPoly 0:" << motorPoly[1]);
		ROS_INFO_STREAM("motorPoly 0:" << motorPoly[2]);

		// An example of "printing out" the per motor 16-bit command computed.
		ROS_INFO_STREAM("controlOutput.cmd1 = " << response.controlOutput.motorCmd1);
		ROS_INFO_STREAM("controlOutput.cmd3 = " << response.controlOutput.motorCmd2);
		ROS_INFO_STREAM("controlOutput.cmd2 = " << response.controlOutput.motorCmd3);
		ROS_INFO_STREAM("controlOutput.cmd4 = " << response.controlOutput.motorCmd4);
	}
}



//  ***********************************************************
//  DDDD   EEEEE  BBBB   U   U   GGGG       M   M   SSSS   GGGG
//  D   D  E      B   B  U   U  G           MM MM  S      G
//  D   D  EEE    BBBB   U   U  G           M M M   SSS   G
//  D   D  E      B   B  U   U  G   G       M   M      S  G   G
//  DDDD   EEEEE  BBBB    UUU    GGGG       M   M  SSSS    GGGG

void construct_and_publish_debug_message(Controller::Request &request, Controller::Response &response)
{
	
    // DEBUGGING CODE:
    // As part of the D-FaLL-System we have defined a message type names"DebugMsg".
    // By fill this message with data and publishing it you can display the data in
    // real time using rpt plots. Instructions for using rqt plots can be found on
    // the wiki of the D-FaLL-System repository
    
	// Instantiate a local variable of type "DebugMsg", see the file "DebugMsg.msg"
	// (located in the "msg" folder) to see the full structure of this message.
	DebugMsg debugMsg;

	// Fill the debugging message with the data provided by Vicon
	debugMsg.vicon_x      = request.ownCrazyflie.x;
	debugMsg.vicon_y      = request.ownCrazyflie.y;
	debugMsg.vicon_z      = request.ownCrazyflie.z;
	debugMsg.vicon_roll   = request.ownCrazyflie.roll;
	debugMsg.vicon_pitch  = request.ownCrazyflie.pitch;
	debugMsg.vicon_yaw    = request.ownCrazyflie.yaw;

	// Fill in the debugging message with any other data you would like to display
	// in real time. For example, it might be useful to display the thrust
	// adjustment computed by the z-altitude controller.
	// The "DebugMsg" type has 10 properties from "value_1" to "value_10", all of
	// type "float64" that you can fill in with data you would like to plot in
	// real-time.
	// debugMsg.value_1 = thrustAdjustment;
	// ......................
	// debugMsg.value_10 = your_variable_name;

	// Publish the "debugMsg"
	debugPublisher.publish(debugMsg);
}


//    ------------------------------------------------------------------------------
//    RRRR    OOO   TTTTT    A    TTTTT  EEEEE       III  N   N  TTTTT   OOO
//    R   R  O   O    T     A A     T    E            I   NN  N    T    O   O
//    RRRR   O   O    T    A   A    T    EEE          I   N N N    T    O   O
//    R  R   O   O    T    AAAAA    T    E            I   N  NN    T    O   O
//    R   R   OOO     T    A   A    T    EEEEE       III  N   N    T     OOO
//
//    BBBB    OOO   DDDD   Y   Y       FFFFF  RRRR     A    M   M  EEEEE
//    B   B  O   O  D   D   Y Y        F      R   R   A A   MM MM  E
//    BBBB   O   O  D   D    Y         FFF    RRRR   A   A  M M M  EEE
//    B   B  O   O  D   D    Y         F      R  R   AAAAA  M   M  E
//    BBBB    OOO   DDDD     Y         F      R   R  A   A  M   M  EEEEE
//    ------------------------------------------------------------------------------

void convertIntoBodyFrame(float stateInertial[12], float (&stateBody)[12], float yaw_measured)
{
	if (shouldPerformConvertIntoBodyFrame)
	{
		float sinYaw = sin(yaw_measured);
    	float cosYaw = cos(yaw_measured);

    	// Fill in the (x,y,z) position estimates to be returned
	    stateBody[0] = stateInertial[0] * cosYaw  +  stateInertial[1] * sinYaw;
	    stateBody[1] = stateInertial[1] * cosYaw  -  stateInertial[0] * sinYaw;
	    stateBody[2] = stateInertial[2];

	    // Fill in the (x,y,z) velocity estimates to be returned
	    stateBody[3] = stateInertial[3] * cosYaw  +  stateInertial[4] * sinYaw;
	    stateBody[4] = stateInertial[4] * cosYaw  -  stateInertial[3] * sinYaw;
	    stateBody[5] = stateInertial[5];

	    // Fill in the (roll,pitch,yaw) estimates to be returned
	    stateBody[6] = stateInertial[6];
	    stateBody[7] = stateInertial[7];
	    stateBody[8] = stateInertial[8];

	    // Fill in the (roll,pitch,yaw) velocity estimates to be returned
	    stateBody[9]  = stateInertial[9];
	    stateBody[10] = stateInertial[10];
	    stateBody[11] = stateInertial[11];
	}
	else
	{
	    // Fill in the (x,y,z) position estimates to be returned
	    stateBody[0] = stateInertial[0];
	    stateBody[1] = stateInertial[1];
	    stateBody[2] = stateInertial[2];

	    // Fill in the (x,y,z) velocity estimates to be returned
	    stateBody[3] = stateInertial[3];
	    stateBody[4] = stateInertial[4];
	    stateBody[5] = stateInertial[5];

	    // Fill in the (roll,pitch,yaw) estimates to be returned
	    stateBody[6] = stateInertial[6];
	    stateBody[7] = stateInertial[7];
	    stateBody[8] = stateInertial[8];

	    // Fill in the (roll,pitch,yaw) velocity estimates to be returned
	    stateBody[9]  = stateInertial[9];
	    stateBody[10] = stateInertial[10];
	    stateBody[11] = stateInertial[11];
	}
}




void convert_stateInertial_to_bodyFrameError(float stateInertial[12], float setpoint[4], float (&bodyFrameError)[12])
{
	// Store the current YAW in a local variable
	float temp_stateInertial_yaw = stateInertial[8];

	// Adjust the INERTIAL (x,y,z) position for the setpoint
	stateInertial[0] = stateInertial[0] - setpoint[0] - m_xAdjustment;
	stateInertial[1] = stateInertial[1] - setpoint[1] - m_yAdjustment;
	stateInertial[2] = stateInertial[2] - setpoint[2];

833
	if (stateInertial[2] > 30.0f)
834
	{
835
836
837
838
839
		stateInertial[2] = 30.0f;
	}
	else if (stateInertial[2] < -30.0f)
	{
		stateInertial[2] = 30.0f;
840
841
	}

842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
	// Fill in the yaw angle error
	// > This error should be "unwrapped" to be in the range
	//   ( -pi , pi )
	// > First, get the yaw error into a local variable
	float yawError = stateInertial[8] - setpoint[3];
	// > Second, "unwrap" the yaw error to the interval ( -pi , pi )
	while(yawError > PI) {yawError -= 2 * PI;}
	while(yawError < -PI) {yawError += 2 * PI;}
	// > Third, put the "yawError" into the "stateError" variable
	stateInertial[8] = yawError;


	if (yawError>(PI/6))
	{
		yawError = (PI/6);
	}
	else if (yawError<(-PI/6))
	{
		yawError = (-PI/6);
	}

	// CONVERSION INTO BODY FRAME
	// Conver the state erorr from the Inertial frame into the Body frame
	// > Note: the function "convertIntoBodyFrame" is implemented in this file
	//   and by default does not perform any conversion. The equations to convert
	//   the state error into the body frame should be implemented in that function
	//   for successful completion of the PPS exercise
	convertIntoBodyFrame(stateInertial, bodyFrameError, temp_stateInertial_yaw);
}




//    ------------------------------------------------------------------------------
//    N   N  EEEEE  W     W   TTTTT   OOO   N   N        CCCC  M   M  DDDD
//    NN  N  E      W     W     T    O   O  NN  N       C      MM MM  D   D
//    N N N  EEE    W     W     T    O   O  N N N  -->  C      M M M  D   D
//    N  NN  E       W W W      T    O   O  N  NN       C      M   M  D   D
//    N   N  EEEEE    W W       T     OOO   N   N        CCCC  M   M  DDDD
//
//     CCCC   OOO   N   N  V   V  EEEEE  RRRR    SSSS  III   OOO   N   N
//    C      O   O  NN  N  V   V  E      R   R  S       I   O   O  NN  N
//    C      O   O  N N N  V   V  EEE    RRRR    SSS    I   O   O  N N N
//    C      O   O  N  NN   V V   E      R  R       S   I   O   O  N  NN
//     CCCC   OOO   N   N    V    EEEEE  R   R  SSSS   III   OOO   N   N
//    ------------------------------------------------------------------------------

// This function DOES NOT NEED TO BE edited for successful completion of the PPS exercise
float computeMotorPolyBackward(float thrust)
{
	// Compute the 16-bit command signal that generates the "thrust" force
	float cmd = (-motorPoly[1] + sqrt(motorPoly[1] * motorPoly[1] - 4 * motorPoly[2] * (motorPoly[0] - thrust))) / (2 * motorPoly[2]);

	// Saturate the signal to be 0 or in the range [1000,65000]
	if (cmd < cmd_sixteenbit_min)
	{
		cmd = 0;
	}
	else if (cmd > cmd_sixteenbit_max)
	{
		cmd = cmd_sixteenbit_max;
	}

    return cmd;
}




//    ----------------------------------------------------------------------------------
//    N   N  EEEEE  W     W        SSSS  EEEEE  TTTTT  PPPP    OOO   III  N   N  TTTTT
//    NN  N  E      W     W       S      E        T    P   P  O   O   I   NN  N    T
//    N N N  EEE    W     W        SSS   EEE      T    PPPP   O   O   I   N N N    T
//    N  NN  E       W W W            S  E        T    P      O   O   I   N  NN    T
//    N   N  EEEEE    W W         SSSS   EEEEE    T    P       OOO   III  N   N    T
//
//     GGG   U   U  III        CCCC    A    L      L      BBBB     A     CCCC  K   K
//    G   G  U   U   I        C       A A   L      L      B   B   A A   C      K  K
//    G      U   U   I        C      A   A  L      L      BBBB   A   A  C      KKK
//    G   G  U   U   I        C      AAAAA  L      L      B   B  AAAAA  C      K  K
//     GGGG   UUU   III        CCCC  A   A  LLLLL  LLLLL  BBBB   A   A   CCCC  K   K
//    ----------------------------------------------------------------------------------

// This function DOES NOT NEED TO BE edited for successful completion of the PPS exercise
void setpointCallback(const Setpoint& newSetpoint)
{
    m_setpoint[0] = newSetpoint.x;
    m_setpoint[1] = newSetpoint.y;
    m_setpoint[2] = newSetpoint.z;
    m_setpoint[3] = newSetpoint.yaw;
}


935
936
937
938
939
940
941
942
943
944
945
void publishCurrentSetpoint()
{
	Setpoint msg_setpoint;
    msg_setpoint.x   = m_setpoint[0];
    msg_setpoint.y   = m_setpoint[1];
    msg_setpoint.z   = m_setpoint[2];
    msg_setpoint.yaw = m_setpoint[3];

    pickerSetpointToGUIPublisher.publish(msg_setpoint);
}

946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984

//    ----------------------------------------------------------------------------------
//     CCCC  U   U   SSSS  TTTTT   OOO   M   M
//    C      U   U  S        T    O   O  MM MM
//    C      U   U   SSS     T    O   O  M M M
//    C      U   U      S    T    O   O  M   M
//     CCCC   UUU   SSSS     T     OOO   M   M
//
//     CCCC   OOO   M   M  M   M    A    N   N  DDDD
//    C      O   O  MM MM  MM MM   A A   NN  N  D   D
//    C      O   O  M M M  M M M  A   A  N N N  D   D
//    C      O   O  M   M  M   M  AAAAA  N  NN  D   D
//     CCCC   OOO   M   M  M   M  A   A  N   N  DDDD
//    ----------------------------------------------------------------------------------

// CUSTOM COMMAND RECEIVED CALLBACK
void buttonPressedCallback(const std_msgs::Int32& msg)
{
	// Extract the data from the message
	int button_index = msg.data;

	// Switch between the button pressed
	switch(button_index)
	{
		case PICKER_BUTTON_GOTOSTART:
			buttonPressed_gotoStart();
			break;
		case PICKER_BUTTON_CONNECT:
			buttonPressed_connect();
			break;
		case PICKER_BUTTON_PICKUP:
			buttonPressed_pickup();
			break;
		case PICKER_BUTTON_GOTOEND:
			buttonPressed_gotoEnd();
			break;
		case PICKER_BUTTON_PUTDOWN:
			buttonPressed_putdown();
			break;
985
986
987
		case PICKER_BUTTON_SQUAT:
			buttonPressed_squat();
			break;
988
989
990
991
992
993
994
995
996
997
998
999
1000
		case PICKER_BUTTON_DISCONNECT:
			buttonPressed_disconnect();
			break;
		case PICKER_BUTTON_1:
			buttonPressed_1();
			break;
		case PICKER_BUTTON_2:
			buttonPressed_2();
			break;
		case PICKER_BUTTON_3:
			buttonPressed_3();
			break;
		case PICKER_BUTTON_4:
For faster browsing, not all history is shown. View entire blame