| ... | ... | @@ -35,4 +35,4 @@ Note: by default, tracing only starts 1s after the test to avoid capturing many |
|
|
|
<br />
|
|
|
|
|
|
|
|
## Where can I buy the DPP2 LoRa communication board for debugging on the desk?
|
|
|
|
The DPP2 LoRa comboard that is used on FlockLab is a custom board and not available as an off-the-shelf component. Since the hardware design files are open-source, you can manufacture your own boards. However, this is very cost intensive for small batch sizes. Therefore, it may be a more economical option to buy a NUCLEO-L476RG and SX1262MB2CAS shield instead. The hardware is obviously slightly different, which requires adjustments to clock, GPIO and peripheral configuration. Our [LWB sample code](https://gitlab.ethz.ch/tec/public/flora/lwb) has a separate branch ([`nucleo-devkit`](https://gitlab.ethz.ch/tec/public/flora/lwb/-/tree/nucleo-devkit)) which is compatible with the mentioned nucleo board and sx1262 shield. |
|
|
\ No newline at end of file |
|
|
|
The DPP2 LoRa comboard that is used on FlockLab is a custom board and not available as an off-the-shelf component. Since the [hardware design files](https://gitlab.ethz.ch/tec/public/dpp/dpp/-/tree/master/hardware/dpp2_sx1262) are open-source, you can manufacture your own boards (Gerber files available upon request). However, this is very cost intensive for small batch sizes. Therefore, it may be a more economical option to buy a NUCLEO-L476RG and SX1262MB2CAS shield instead. The hardware is obviously slightly different, which requires adjustments to clock, GPIO and peripheral configuration. Our [LWB sample code](https://gitlab.ethz.ch/tec/public/flora/lwb) has a separate branch ([`nucleo-devkit`](https://gitlab.ethz.ch/tec/public/flora/lwb/-/tree/nucleo-devkit)) which is compatible with the mentioned nucleo board and sx1262 shield. |
|
|
\ No newline at end of file |
