Skip to content
GitLab
Commits (2)
Hide whitespace changes
Inline Side-by-side
definitions/messages/dpp_type.h
View file @ c1346f9c
......@@ -60,7 +60,7 @@ typedef enum {
#include "types/dpp_sx1262_command_type.h"
DPP_COMMAND_GEO3X = ((uint16_t)DPP_COMPONENT_ID_GEO3X << 8),
//#include "types/dpp_geo3x_command_type.h"
//#include "types/dpp_geophone3x_command_type.h"
DPP_COMMAND_GEOMINI = ((uint16_t)DPP_COMPONENT_ID_GEOMINI << 8),
//#include "types/dpp_geomini_command_type.h"
......@@ -94,7 +94,7 @@ typedef enum {
#include "types/dpp_sx1262_event_type.h"
DPP_EVENT_GEO3X = ((uint16_t)DPP_COMPONENT_ID_GEO3X << 8),
//#include "types/dpp_geo3x_event_type.h"
#include "types/dpp_geophone3x_event_type.h"
DPP_EVENT_GEOMINI = ((uint16_t)DPP_COMPONENT_ID_GEOMINI << 8),
//#include "types/dpp_geomini_event_type.h"
......
definitions/messages/types/dpp_geophone3x_event_type.h 0 → 100644
View file @ c1346f9c
/*
* Copyright (c) 2017 - 2021, ETH Zurich, Computer Engineering Group (TEC)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* event types specific to APP (application processor)
*
*
* typedef enum {
* ...
* DPP_EVENT_[device_name] = [start_id],
* [your_defines]
* ...
* } dpp_event_type_t;
*
* add a comma after each define!
*/
/* Label --------------------------- | #No. | Description ---------------------*/
EVENT_GEOPHONE3X_START, /* 0x01 | Application and OS started */
EVENT_GEOPHONE3X_SELFTEST, /* 0x02 | Self-Test. Value: result of self-test */
EVENT_GEOPHONE3X_TSYNC_TIMEOUT, /* 0x03 | TimeSync request timeout */
EVENT_GEOPHONE3X_BOLT_MSG_TIMESTAMP, /* 0x04 | Timestamp received */
EVENT_GEOPHONE3X_BOLT_READ_ERROR, /* 0x05 | BOLT read error. Value: error source */
EVENT_GEOPHONE3X_BOLT_WRITE_ERROR, /* 0x06 | BOLT write error. Value: error source */
EVENT_GEOPHONE3X_BOLT_INVALID, /* 0x07 | BOLT invalid request from application */
EVENT_GEOPHONE3X_LOG_ERROR, /* 0x08 | LOG error. Value: error source */
EVENT_GEOPHONE3X_ACQ_ERR_TIMEOUT, /* 0x09 | ACQ sampling error: semaphore timeout */
EVENT_GEOPHONE3X_CONFIG_WR_ERR, /* 0x0A | Config write to SD error */
EVENT_GEOPHONE3X_CONFIG_RD_ERR, /* 0x0B | Config read from SD error */
EVENT_GEOPHONE3X_CONFIG_SYNTAX_ERR, /* 0x0C | Config syntax error */
EVENT_GEOPHONE3X_TSYNC_INV_VAL, /* 0x0D | Potentially invalid timestamp received */
EVENT_GEOPHONE3X_NA_0x0E, /* 0x0E | */
EVENT_GEOPHONE3X_NA_0x0F, /* 0x0F | */
EVENT_GEOPHONE3X_CMD_RESET, /* 0x10 | APP CMD: reset */
EVENT_GEOPHONE3X_CMD_SELFTEST, /* 0x11 | APP CMD: self-test */
EVENT_GEOPHONE3X_CMD_EXTTRG, /* 0x12 | APP CMD: external trigger */
EVENT_GEOPHONE3X_CMD_GAIN1, /* 0x13 | APP CMD: triggering gain stage 1 */
EVENT_GEOPHONE3X_CMD_GAIN2, /* 0x14 | APP CMD: triggering gain stage 2 */
EVENT_GEOPHONE3X_CMD_TRG_TH_POS, /* 0x15 | APP CMD: positive trigger threshold value*/
EVENT_GEOPHONE3X_CMD_TRG_TH_NEG, /* 0x16 | APP CMD: negative trigger threshold value*/
EVENT_GEOPHONE3X_CMD_POSTTRG, /* 0x17 | APP CMD: set post-triggering. Value: interval [s] */
EVENT_GEOPHONE3X_CMD_TIMEOUT, /* 0x18 | APP CMD: set sampling timeout. Value: interval [s] */
EVENT_GEOPHONE3X_CMD_PGA, /* 0x19 | APP CMD: set ADC PGA. Value: gain */
EVENT_GEOPHONE3X_CMD_FORMAT, /* 0x1A | APP CMD: set ADC data format. Value: data-format */
EVENT_GEOPHONE3X_CMD_IMU_FREQ_HP, /* 0x1B | APP CMD: set IMU frequency High-power. Value: frequency [Hz] */
EVENT_GEOPHONE3X_MSC_MOUNT, /* 0x1C | USB MSC mounted */
EVENT_GEOPHONE3X_MSC_EJECT, /* 0x1D | USB MSC ejected */
EVENT_GEOPHONE3X_CMD_SPS, /* 0x1E | APP CMD: set ADC rate (SPS). Value: frequency [Hz] */
EVENT_GEOPHONE3X_CMD_SYS_OPMODE, /* 0x1F | APP CMD: set operating mode. Value: @see enum OpModes */
EVENT_GEOPHONE3X_STACK_90, /* 0x20 | RTOS stack watermark 90% reached. Value: task ID */
EVENT_GEOPHONE3X_STACK_TMRSVC, /* 0x21 | Timer Daemon Stack watermark 90% reached. Value: stack usage percentage */
EVENT_GEOPHONE3X_STACK_IDLE, /* 0x22 | Idle Task Stack watermark 90% reached. Value: stack usage percentage */
EVENT_GEOPHONE3X_HEAP_90, /* 0x23 | Heap usage 90% reached. Value: heap usage percentage */
EVENT_GEOPHONE3X_VCC_OOR, /* 0x24 | Battery VCC value is out-of-range */
EVENT_GEOPHONE3X_TEMP_OOR, /* 0x25 | Temperature value is out-of-range */
EVENT_GEOPHONE3X_HUMID_OOR, /* 0x26 | Humidity value is out-of-range */
EVENT_GEOPHONE3X_RB_FULL, /* 0x27 | Ring buffer full (argument: buffer ID) */
EVENT_GEOPHONE3X_SD_IO_ERROR, /* 0x28 | SD card read or write error */
EVENT_GEOPHONE3X_SD_INV_FILE, /* 0x29 | File does not exist or is invalid */
EVENT_GEOPHONE3X_CMD_REQ_ADCDATA, /* 0x2A | APP CMD: get ADC data (waveform). Value: error code */
EVENT_GEOPHONE3X_CMD_DEL_DATA, /* 0x2B | APP CMD: data from SD card deleted. Value: # deleted files */
EVENT_GEOPHONE3X_CMD_RESET_CFG, /* 0x2C | APP CMD: config has been reset to the default values */
EVENT_GEOPHONE3X_CMD_IMU_FREQ_LP, /* 0x2D | APP CMD: set IMU frequency Low-power. Value: frequency [Hz] */
EVENT_GEOPHONE3X_CMD_IMU_FREQ_AA, /* 0x2E | APP CMD: set IMU frequency Anti-Aliasing. Value: frequency [Hz] */
EVENT_GEOPHONE3X_CMD_IMU_OPMODE, /* 0x2F | APP CMD: set IMU Operation Mode. */
EVENT_GEOPHONE3X_CMD_IMU_TRG_LVL, /* 0x30 | APP CMD: set IMU Trigger Level. */
EVENT_GEOPHONE3X_CMD_IMU_DATA_DEC, /* 0x31 | APP CMD: set IMU Data Decimation. Value: samples */
EVENT_GEOPHONE3X_SCHED_CL_ERR, /* 0x32 | Scheduler clear error */
EVENT_GEOPHONE3X_SCHED_WR_ERR, /* 0x33 | Add an entry to the scheduler error */
EVENT_GEOPHONE3X_CMD_SYS_WAKEUP_PERIOD, /* 0x34 | APP CMD: set new Wakeup time. Remember to make an application reset afterwards */
EVENT_GEOPHONE3X_CMD_TSYNC_PERIOD, /* 0x35 | APP CMD: Set the new Bolt tysnc period */
EVENT_GEOPHONE3X_SD_FULL, /* 0x36 | SD card is almost full */
EVENT_GEOPHONE3X_GNSS_CRC_ERR, /* 0x37 | GNSS message CRC error */
EVENT_GEOPHONE3X_RTC_SYNC, /* 0x38 | RTC has been synced */
EVENT_GEOPHONE3X_GNSS_UART_ERR, /* 0x39 | GNSS UART error */
/* Label --------------------------- | #No. | Description ----------------------------*/
definitions/messages/types/dpp_geophone_event_type.h
View file @ c1346f9c
......@@ -56,7 +56,7 @@ EVENT_GEOPHONE_ACQ_ERR_TIMEOUT, /* 0x09 | ACQ sampling error: semaphore time
EVENT_GEOPHONE_CONFIG_WR_ERR, /* 0x0A | Config write to SD error */
EVENT_GEOPHONE_CONFIG_RD_ERR, /* 0x0B | Config read from SD error */
EVENT_GEOPHONE_CONFIG_SYNTAX_ERR, /* 0x0C | Config syntax error */
EVENT_GEOPHONE_NA_0x0D, /* 0x0D | */
EVENT_GEOPHONE_TSYNC_INV_VAL, /* 0x0D | Potentially invalid timestamp received */
EVENT_GEOPHONE_NA_0x0E, /* 0x0E | */
EVENT_GEOPHONE_NA_0x0F, /* 0x0F | */
......