Commit af0d49f7 authored by Reto Da Forno's avatar Reto Da Forno
Browse files

event description updated

parent 91d8c4c5
......@@ -104,7 +104,7 @@ CMD_SX1262_RESERVED_2E,
CMD_SX1262_RESERVED_2F,
/* radio commands */
CMD_SX1262_SET_TX_POWER, /* 0x30 | Set the radio transmit power */ /* @param: TX power in dBm (1 byte, signed) */
CMD_SX1262_SET_TX_POWER, /* 0x30 | Set the radio transmit power */ /* @param: TX power in dBm (16-bit, signed) */
CMD_SX1262_SET_MODULATION, /* 0x31 | Set the radio modulation */ /* @param: modulation table index according to radio_constants.c (1 byte) */
/* Label ----------------------------- | #No. | Description ----------------------------*/
......@@ -37,23 +37,23 @@
/* Label ----------------------- | #No. | Description ---------------------- | Value ---*/
EVENT_SX1262_CMD_EXECUTED, /* 0x01 | command executed (ACK) | cmd type */
EVENT_SX1262_TIME_UPDATED, /* 0x02 | local time has been adjusted | delta (jump in us) */
EVENT_SX1262_QUEUE_FULL, /* 0x03 | queue full, message dropped | queue ID */
EVENT_SX1262_INV_MSG, /* 0x04 | invalid message received | error code */
EVENT_SX1262_INV_CMD, /* 0x05 | invalid command received | cmd type and value */
EVENT_SX1262_MSG_IGNORED, /* 0x06 | unknown message type, ignored | msg type */
EVENT_SX1262_RADIO_ERROR, /* 0x07 | radio error | error code */
EVENT_SX1262_BOLT_ERROR, /* 0x08 | bolt communication error | error code */
EVENT_SX1262_STACK_WM, /* 0x09 | stack watermark notification | watermark + task ID */
EVENT_SX1262_HOST_ID_ERROR, /* 0x0a | error related to the host ID | error code */
EVENT_SX1262_SCHED_MISSED, /* 0x0b | schedule packet missed | error code */
EVENT_SX1262_MUTEX_ERROR, /* 0x0c | error related to mutual exclusion (semaphores, critical sections) | error code */
EVENT_SX1262_TSYNC_ERROR, /* 0x0d | error or warning related to time synchronization | error code */
EVENT_SX1262_TSYNC_DRIFT, /* 0x0e | high drift warning | drift (ppm) */
EVENT_SX1262_CMD_EXECUTED, /* 0x01 | command executed (ACK) | cmd type (16-bit) + argument (16-bit) */
EVENT_SX1262_TIME_UPDATED, /* 0x02 | local time has been adjusted | time delta / jump in ms (32-bit signed) */
EVENT_SX1262_QUEUE_FULL, /* 0x03 | queue full, message dropped | queue ID (32-bit) */
EVENT_SX1262_INV_MSG, /* 0x04 | invalid message received | sender device ID (16-bit) + message length in bytes (16-bit) */
EVENT_SX1262_INV_CMD, /* 0x05 | invalid command received | cmd type (16-bit) + argument (16-bit) */
EVENT_SX1262_MSG_IGNORED, /* 0x06 | unknown message type, ignored | sender device ID (16-bit) + msg type (16-bit) */
EVENT_SX1262_RADIO_ERROR, /* 0x07 | radio error | error code (32-bit) */
EVENT_SX1262_BOLT_ERROR, /* 0x08 | bolt communication error | error code (32-bit) */
EVENT_SX1262_STACK_WM, /* 0x09 | stack watermark notification | watermark (16-bit) + task ID (16-bit) */
EVENT_SX1262_HOST_ID_ERROR, /* 0x0a | error related to the host ID | error code (32-bit) */
EVENT_SX1262_SCHED_MISSED, /* 0x0b | schedule packet missed | error code (32-bit) */
EVENT_SX1262_MUTEX_ERROR, /* 0x0c | error related to mutual exclusion (semaphores, critical sections) | error code (32-bit) */
EVENT_SX1262_TSYNC_ERROR, /* 0x0d | error or warning related to time synchronization | error code (32-bit) */
EVENT_SX1262_TSYNC_DRIFT, /* 0x0e | high drift warning | drift in ppm (signed 32-bit) */
EVENT_SX1262_RTC_ERROR, /* 0x0f | error related to the RTC | error code */
EVENT_SX1262_TIMEOUT, /* 0x10 | generic timeout error | error code */
EVENT_SX1262_RESET, /* 0x11 | device reset occurred | reset cause (16-bit) + counter (16-bit) */
EVENT_SX1262_TX_FAILED, /* 0x12 | transmission failed (e.g. due to channel busy or no ACK received) | error code */
EVENT_SX1262_FW_OTA_STATUS, /* 0x13 | firmware update status | status code */
EVENT_SX1262_CMD_FORWARDED, /* 0x14 | command forwarded | target ID */
EVENT_SX1262_TX_FAILED, /* 0x12 | transmission failed (e.g. due to channel busy or no ACK received) | error code (32-bit) */
EVENT_SX1262_FW_OTA_STATUS, /* 0x13 | firmware update status | progress in percent (32-bit) */
EVENT_SX1262_CMD_FORWARDED, /* 0x14 | command forwarded | target ID (16-bit) + cmd type (16-bit) */
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment