diff --git a/src/finn/qnn-data/verilog/myadd/myadd_myadd.v b/src/finn/qnn-data/verilog/myadd/myadd_myadd.v
new file mode 100644
index 0000000000000000000000000000000000000000..0b18b5c300c4dc62d2f0105a896d19980a4f7dca
--- /dev/null
+++ b/src/finn/qnn-data/verilog/myadd/myadd_myadd.v
@@ -0,0 +1,118 @@
+// ==============================================================
+// RTL generated by Vivado(TM) HLS - High-Level Synthesis from C, C++ and SystemC
+// Version: 2019.1
+// Copyright (C) 1986-2019 Xilinx, Inc. All Rights Reserved.
+//
+// ===========================================================
+
+`timescale 1 ns / 1 ps
+
+(* CORE_GENERATION_INFO="myadd_myadd,hls_ip_2019_1,{HLS_INPUT_TYPE=cxx,HLS_INPUT_FLOAT=0,HLS_INPUT_FIXED=1,HLS_INPUT_PART=xc7z020-clg400-1,HLS_INPUT_CLOCK=5.000000,HLS_INPUT_ARCH=others,HLS_SYN_CLOCK=3.552000,HLS_SYN_LAT=0,HLS_SYN_TPT=none,HLS_SYN_MEM=0,HLS_SYN_DSP=0,HLS_SYN_FF=144,HLS_SYN_LUT=271,HLS_VERSION=2019_1}" *)
+
+module myadd_myadd (
+ s_axi_control_AWVALID,
+ s_axi_control_AWREADY,
+ s_axi_control_AWADDR,
+ s_axi_control_WVALID,
+ s_axi_control_WREADY,
+ s_axi_control_WDATA,
+ s_axi_control_WSTRB,
+ s_axi_control_ARVALID,
+ s_axi_control_ARREADY,
+ s_axi_control_ARADDR,
+ s_axi_control_RVALID,
+ s_axi_control_RREADY,
+ s_axi_control_RDATA,
+ s_axi_control_RRESP,
+ s_axi_control_BVALID,
+ s_axi_control_BREADY,
+ s_axi_control_BRESP,
+ ap_clk,
+ ap_rst_n,
+ interrupt
+);
+
+parameter C_S_AXI_CONTROL_DATA_WIDTH = 32;
+parameter C_S_AXI_CONTROL_ADDR_WIDTH = 6;
+parameter C_S_AXI_DATA_WIDTH = 32;
+
+parameter C_S_AXI_CONTROL_WSTRB_WIDTH = (32 / 8);
+parameter C_S_AXI_WSTRB_WIDTH = (32 / 8);
+
+input s_axi_control_AWVALID;
+output s_axi_control_AWREADY;
+input [C_S_AXI_CONTROL_ADDR_WIDTH - 1:0] s_axi_control_AWADDR;
+input s_axi_control_WVALID;
+output s_axi_control_WREADY;
+input [C_S_AXI_CONTROL_DATA_WIDTH - 1:0] s_axi_control_WDATA;
+input [C_S_AXI_CONTROL_WSTRB_WIDTH - 1:0] s_axi_control_WSTRB;
+input s_axi_control_ARVALID;
+output s_axi_control_ARREADY;
+input [C_S_AXI_CONTROL_ADDR_WIDTH - 1:0] s_axi_control_ARADDR;
+output s_axi_control_RVALID;
+input s_axi_control_RREADY;
+output [C_S_AXI_CONTROL_DATA_WIDTH - 1:0] s_axi_control_RDATA;
+output [1:0] s_axi_control_RRESP;
+output s_axi_control_BVALID;
+input s_axi_control_BREADY;
+output [1:0] s_axi_control_BRESP;
+input ap_clk;
+input ap_rst_n;
+output interrupt;
+
+wire ap_start;
+wire ap_done;
+wire ap_idle;
+wire ap_ready;
+wire [31:0] a_V;
+wire [31:0] b_V;
+wire [31:0] ap_return;
+ reg ap_rst_n_inv;
+
+myadd_myadd_control_s_axi #(
+ .C_S_AXI_ADDR_WIDTH( C_S_AXI_CONTROL_ADDR_WIDTH ),
+ .C_S_AXI_DATA_WIDTH( C_S_AXI_CONTROL_DATA_WIDTH ))
+myadd_control_s_axi_U(
+ .AWVALID(s_axi_control_AWVALID),
+ .AWREADY(s_axi_control_AWREADY),
+ .AWADDR(s_axi_control_AWADDR),
+ .WVALID(s_axi_control_WVALID),
+ .WREADY(s_axi_control_WREADY),
+ .WDATA(s_axi_control_WDATA),
+ .WSTRB(s_axi_control_WSTRB),
+ .ARVALID(s_axi_control_ARVALID),
+ .ARREADY(s_axi_control_ARREADY),
+ .ARADDR(s_axi_control_ARADDR),
+ .RVALID(s_axi_control_RVALID),
+ .RREADY(s_axi_control_RREADY),
+ .RDATA(s_axi_control_RDATA),
+ .RRESP(s_axi_control_RRESP),
+ .BVALID(s_axi_control_BVALID),
+ .BREADY(s_axi_control_BREADY),
+ .BRESP(s_axi_control_BRESP),
+ .ACLK(ap_clk),
+ .ARESET(ap_rst_n_inv),
+ .ACLK_EN(1'b1),
+ .ap_start(ap_start),
+ .interrupt(interrupt),
+ .ap_ready(ap_ready),
+ .ap_done(ap_done),
+ .ap_idle(ap_idle),
+ .ap_return(ap_return),
+ .a_V(a_V),
+ .b_V(b_V)
+);
+
+assign ap_done = ap_start;
+
+assign ap_idle = 1'b1;
+
+assign ap_ready = ap_start;
+
+assign ap_return = (b_V + a_V);
+
+always @ (*) begin
+ ap_rst_n_inv = ~ap_rst_n;
+end
+
+endmodule //myadd_myadd
diff --git a/src/finn/qnn-data/verilog/myadd/myadd_myadd_control_s_axi.v b/src/finn/qnn-data/verilog/myadd/myadd_myadd_control_s_axi.v
new file mode 100644
index 0000000000000000000000000000000000000000..40260ca930b5dc251f9d095420ae9ad0b77d4c93
--- /dev/null
+++ b/src/finn/qnn-data/verilog/myadd/myadd_myadd_control_s_axi.v
@@ -0,0 +1,357 @@
+// ==============================================================
+// Vivado(TM) HLS - High-Level Synthesis from C, C++ and SystemC v2019.1 (64-bit)
+// Copyright 1986-2019 Xilinx, Inc. All Rights Reserved.
+// ==============================================================
+`timescale 1ns/1ps
+module myadd_myadd_control_s_axi
+#(parameter
+ C_S_AXI_ADDR_WIDTH = 6,
+ C_S_AXI_DATA_WIDTH = 32
+)(
+ input wire ACLK,
+ input wire ARESET,
+ input wire ACLK_EN,
+ input wire [C_S_AXI_ADDR_WIDTH-1:0] AWADDR,
+ input wire AWVALID,
+ output wire AWREADY,
+ input wire [C_S_AXI_DATA_WIDTH-1:0] WDATA,
+ input wire [C_S_AXI_DATA_WIDTH/8-1:0] WSTRB,
+ input wire WVALID,
+ output wire WREADY,
+ output wire [1:0] BRESP,
+ output wire BVALID,
+ input wire BREADY,
+ input wire [C_S_AXI_ADDR_WIDTH-1:0] ARADDR,
+ input wire ARVALID,
+ output wire ARREADY,
+ output wire [C_S_AXI_DATA_WIDTH-1:0] RDATA,
+ output wire [1:0] RRESP,
+ output wire RVALID,
+ input wire RREADY,
+ output wire interrupt,
+ output wire ap_start,
+ input wire ap_done,
+ input wire ap_ready,
+ input wire ap_idle,
+ input wire [31:0] ap_return,
+ output wire [31:0] a_V,
+ output wire [31:0] b_V
+);
+//------------------------Address Info-------------------
+// 0x00 : Control signals
+// bit 0 - ap_start (Read/Write/SC)
+// bit 1 - ap_done (Read/COR)
+// bit 2 - ap_idle (Read)
+// bit 3 - ap_ready (Read)
+// bit 7 - auto_restart (Read/Write)
+// others - reserved
+// 0x04 : Global Interrupt Enable Register
+// bit 0 - Global Interrupt Enable (Read/Write)
+// others - reserved
+// 0x08 : IP Interrupt Enable Register (Read/Write)
+// bit 0 - Channel 0 (ap_done)
+// others - reserved
+// 0x0c : IP Interrupt Status Register (Read/TOW)
+// bit 0 - Channel 0 (ap_done)
+// others - reserved
+// 0x10 : Data signal of ap_return
+// bit 31~0 - ap_return[31:0] (Read)
+// 0x18 : Data signal of a_V
+// bit 31~0 - a_V[31:0] (Read/Write)
+// 0x1c : reserved
+// 0x20 : Data signal of b_V
+// bit 31~0 - b_V[31:0] (Read/Write)
+// 0x24 : reserved
+// (SC = Self Clear, COR = Clear on Read, TOW = Toggle on Write, COH = Clear on Handshake)
+
+//------------------------Parameter----------------------
+localparam
+ ADDR_AP_CTRL = 6'h00,
+ ADDR_GIE = 6'h04,
+ ADDR_IER = 6'h08,
+ ADDR_ISR = 6'h0c,
+ ADDR_AP_RETURN_0 = 6'h10,
+ ADDR_A_V_DATA_0 = 6'h18,
+ ADDR_A_V_CTRL = 6'h1c,
+ ADDR_B_V_DATA_0 = 6'h20,
+ ADDR_B_V_CTRL = 6'h24,
+ WRIDLE = 2'd0,
+ WRDATA = 2'd1,
+ WRRESP = 2'd2,
+ WRRESET = 2'd3,
+ RDIDLE = 2'd0,
+ RDDATA = 2'd1,
+ RDRESET = 2'd2,
+ ADDR_BITS = 6;
+
+//------------------------Local signal-------------------
+ reg [1:0] wstate = WRRESET;
+ reg [1:0] wnext;
+ reg [ADDR_BITS-1:0] waddr;
+ wire [31:0] wmask;
+ wire aw_hs;
+ wire w_hs;
+ reg [1:0] rstate = RDRESET;
+ reg [1:0] rnext;
+ reg [31:0] rdata;
+ wire ar_hs;
+ wire [ADDR_BITS-1:0] raddr;
+ // internal registers
+ reg int_ap_idle;
+ reg int_ap_ready;
+ reg int_ap_done = 1'b0;
+ reg int_ap_start = 1'b0;
+ reg int_auto_restart = 1'b0;
+ reg int_gie = 1'b0;
+ reg int_ier = 1'b0;
+ reg int_isr = 1'b0;
+ reg [31:0] int_ap_return;
+ reg [31:0] int_a_V = 'b0;
+ reg [31:0] int_b_V = 'b0;
+
+//------------------------Instantiation------------------
+
+//------------------------AXI write fsm------------------
+assign AWREADY = (wstate == WRIDLE);
+assign WREADY = (wstate == WRDATA);
+assign BRESP = 2'b00; // OKAY
+assign BVALID = (wstate == WRRESP);
+assign wmask = { {8{WSTRB[3]}}, {8{WSTRB[2]}}, {8{WSTRB[1]}}, {8{WSTRB[0]}} };
+assign aw_hs = AWVALID & AWREADY;
+assign w_hs = WVALID & WREADY;
+
+// wstate
+always @(posedge ACLK) begin
+ if (ARESET)
+ wstate <= WRRESET;
+ else if (ACLK_EN)
+ wstate <= wnext;
+end
+
+// wnext
+always @(*) begin
+ case (wstate)
+ WRIDLE:
+ if (AWVALID)
+ wnext = WRDATA;
+ else
+ wnext = WRIDLE;
+ WRDATA:
+ if (WVALID)
+ wnext = WRRESP;
+ else
+ wnext = WRDATA;
+ WRRESP:
+ if (BREADY)
+ wnext = WRIDLE;
+ else
+ wnext = WRRESP;
+ default:
+ wnext = WRIDLE;
+ endcase
+end
+
+// waddr
+always @(posedge ACLK) begin
+ if (ACLK_EN) begin
+ if (aw_hs)
+ waddr <= AWADDR[ADDR_BITS-1:0];
+ end
+end
+
+//------------------------AXI read fsm-------------------
+assign ARREADY = (rstate == RDIDLE);
+assign RDATA = rdata;
+assign RRESP = 2'b00; // OKAY
+assign RVALID = (rstate == RDDATA);
+assign ar_hs = ARVALID & ARREADY;
+assign raddr = ARADDR[ADDR_BITS-1:0];
+
+// rstate
+always @(posedge ACLK) begin
+ if (ARESET)
+ rstate <= RDRESET;
+ else if (ACLK_EN)
+ rstate <= rnext;
+end
+
+// rnext
+always @(*) begin
+ case (rstate)
+ RDIDLE:
+ if (ARVALID)
+ rnext = RDDATA;
+ else
+ rnext = RDIDLE;
+ RDDATA:
+ if (RREADY & RVALID)
+ rnext = RDIDLE;
+ else
+ rnext = RDDATA;
+ default:
+ rnext = RDIDLE;
+ endcase
+end
+
+// rdata
+always @(posedge ACLK) begin
+ if (ACLK_EN) begin
+ if (ar_hs) begin
+ rdata <= 1'b0;
+ case (raddr)
+ ADDR_AP_CTRL: begin
+ rdata[0] <= int_ap_start;
+ rdata[1] <= int_ap_done;
+ rdata[2] <= int_ap_idle;
+ rdata[3] <= int_ap_ready;
+ rdata[7] <= int_auto_restart;
+ end
+ ADDR_GIE: begin
+ rdata <= int_gie;
+ end
+ ADDR_IER: begin
+ rdata <= int_ier;
+ end
+ ADDR_ISR: begin
+ rdata <= int_isr;
+ end
+ ADDR_AP_RETURN_0: begin
+ rdata <= int_ap_return[31:0];
+ end
+ ADDR_A_V_DATA_0: begin
+ rdata <= int_a_V[31:0];
+ end
+ ADDR_B_V_DATA_0: begin
+ rdata <= int_b_V[31:0];
+ end
+ endcase
+ end
+ end
+end
+
+
+//------------------------Register logic-----------------
+assign interrupt = int_gie & (|int_isr);
+assign ap_start = int_ap_start;
+assign a_V = int_a_V;
+assign b_V = int_b_V;
+// int_ap_start
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_ap_start <= 1'b0;
+ else if (ACLK_EN) begin
+ if (w_hs && waddr == ADDR_AP_CTRL && WSTRB[0] && WDATA[0])
+ int_ap_start <= 1'b1;
+ else if (ap_done & int_auto_restart)
+ int_ap_start <= 1'b1; // auto restart
+ else
+ int_ap_start <= 1'b0; // self clear
+ end
+end
+
+// int_ap_done
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_ap_done <= 1'b0;
+ else if (ACLK_EN) begin
+ if (ap_done)
+ int_ap_done <= 1'b1;
+ else if (ar_hs && raddr == ADDR_AP_CTRL)
+ int_ap_done <= 1'b0; // clear on read
+ end
+end
+
+// int_ap_idle
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_ap_idle <= 1'b0;
+ else if (ACLK_EN) begin
+ int_ap_idle <= ap_idle;
+ end
+end
+
+// int_ap_ready
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_ap_ready <= 1'b0;
+ else if (ACLK_EN) begin
+ int_ap_ready <= ap_ready;
+ end
+end
+
+// int_auto_restart
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_auto_restart <= 1'b0;
+ else if (ACLK_EN) begin
+ if (w_hs && waddr == ADDR_AP_CTRL && WSTRB[0])
+ int_auto_restart <= WDATA[7];
+ end
+end
+
+// int_gie
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_gie <= 1'b0;
+ else if (ACLK_EN) begin
+ if (w_hs && waddr == ADDR_GIE && WSTRB[0])
+ int_gie <= WDATA[0];
+ end
+end
+
+// int_ier
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_ier <= 1'b0;
+ else if (ACLK_EN) begin
+ if (w_hs && waddr == ADDR_IER && WSTRB[0])
+ int_ier <= WDATA[0];
+ end
+end
+
+// int_isr
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_isr <= 1'b0;
+ else if (ACLK_EN) begin
+ if (int_ier & ap_done)
+ int_isr <= 1'b1;
+ else if (w_hs && waddr == ADDR_ISR && WSTRB[0])
+ int_isr <= int_isr ^ WDATA[0]; // toggle on write
+ end
+end
+
+// int_ap_return
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_ap_return <= 0;
+ else if (ACLK_EN) begin
+ if (ap_done)
+ int_ap_return <= ap_return;
+ end
+end
+
+// int_a_V[31:0]
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_a_V[31:0] <= 0;
+ else if (ACLK_EN) begin
+ if (w_hs && waddr == ADDR_A_V_DATA_0)
+ int_a_V[31:0] <= (WDATA[31:0] & wmask) | (int_a_V[31:0] & ~wmask);
+ end
+end
+
+// int_b_V[31:0]
+always @(posedge ACLK) begin
+ if (ARESET)
+ int_b_V[31:0] <= 0;
+ else if (ACLK_EN) begin
+ if (w_hs && waddr == ADDR_B_V_DATA_0)
+ int_b_V[31:0] <= (WDATA[31:0] & wmask) | (int_b_V[31:0] & ~wmask);
+ end
+end
+
+
+//------------------------Memory logic-------------------
+
+endmodule