Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • authierj/dfall-system
1 result
Show changes
Hide whitespace changes
Inline Side-by-side
Showing
with 0 additions and 3018 deletions
crazyflie-firmware-src/src/lib/FatFS/syscall.c deleted 100755 → 0
View file @ 6291d058
/*------------------------------------------------------------------------*/
/* Sample code of OS dependent controls for FatFs */
/* (C)ChaN, 2014 */
/*------------------------------------------------------------------------*/
#include "ff.h"
#include <stdint.h>
#if _FS_REENTRANT
/*------------------------------------------------------------------------*/
/* Create a Synchronization Object */
/*------------------------------------------------------------------------*/
/* This function is called in f_mount() function to create a new
/ synchronization object, such as semaphore and mutex. When a 0 is returned,
/ the f_mount() function fails with FR_INT_ERR.
*/
int ff_cre_syncobj ( /* 1:Function succeeded, 0:Could not create the sync object */
BYTE vol, /* Corresponding volume (logical drive number) */
_SYNC_t *sobj /* Pointer to return the created sync object */
)
{
int ret;
*sobj = CreateMutex(NULL, FALSE, NULL); /* Win32 */
ret = (int)(*sobj != INVALID_HANDLE_VALUE);
// *sobj = SyncObjects[vol]; /* uITRON (give a static sync object) */
// ret = 1; /* The initial value of the semaphore must be 1. */
// *sobj = OSMutexCreate(0, &err); /* uC/OS-II */
// ret = (int)(err == OS_NO_ERR);
// *sobj = xSemaphoreCreateMutex(); /* FreeRTOS */
// ret = (int)(*sobj != NULL);
return ret;
}
/*------------------------------------------------------------------------*/
/* Delete a Synchronization Object */
/*------------------------------------------------------------------------*/
/* This function is called in f_mount() function to delete a synchronization
/ object that created with ff_cre_syncobj() function. When a 0 is returned,
/ the f_mount() function fails with FR_INT_ERR.
*/
int ff_del_syncobj ( /* 1:Function succeeded, 0:Could not delete due to any error */
_SYNC_t sobj /* Sync object tied to the logical drive to be deleted */
)
{
int ret;
ret = CloseHandle(sobj); /* Win32 */
// ret = 1; /* uITRON (nothing to do) */
// OSMutexDel(sobj, OS_DEL_ALWAYS, &err); /* uC/OS-II */
// ret = (int)(err == OS_NO_ERR);
// vSemaphoreDelete(sobj); /* FreeRTOS */
// ret = 1;
return ret;
}
/*------------------------------------------------------------------------*/
/* Request Grant to Access the Volume */
/*------------------------------------------------------------------------*/
/* This function is called on entering file functions to lock the volume.
/ When a 0 is returned, the file function fails with FR_TIMEOUT.
*/
int ff_req_grant ( /* 1:Got a grant to access the volume, 0:Could not get a grant */
_SYNC_t sobj /* Sync object to wait */
)
{
int ret;
ret = (int)(WaitForSingleObject(sobj, _FS_TIMEOUT) == WAIT_OBJECT_0); /* Win32 */
// ret = (int)(wai_sem(sobj) == E_OK); /* uITRON */
// OSMutexPend(sobj, _FS_TIMEOUT, &err)); /* uC/OS-II */
// ret = (int)(err == OS_NO_ERR);
// ret = (int)(xSemaphoreTake(sobj, _FS_TIMEOUT) == pdTRUE); /* FreeRTOS */
return ret;
}
/*------------------------------------------------------------------------*/
/* Release Grant to Access the Volume */
/*------------------------------------------------------------------------*/
/* This function is called on leaving file functions to unlock the volume.
*/
void ff_rel_grant (
_SYNC_t sobj /* Sync object to be signaled */
)
{
ReleaseMutex(sobj); /* Win32 */
// sig_sem(sobj); /* uITRON */
// OSMutexPost(sobj); /* uC/OS-II */
// xSemaphoreGive(sobj); /* FreeRTOS */
}
#endif
#if _USE_LFN == 3 /* LFN with a working buffer on the heap */
/*------------------------------------------------------------------------*/
/* Allocate a memory block */
/*------------------------------------------------------------------------*/
/* If a NULL is returned, the file function fails with FR_NOT_ENOUGH_CORE.
*/
void* ff_memalloc ( /* Returns pointer to the allocated memory block */
UINT msize /* Number of bytes to allocate */
)
{
extern void *pvPortMalloc( UINT xSize );
return pvPortMalloc(msize); /* Allocate a new memory block with POSIX API */
}
/*------------------------------------------------------------------------*/
/* Free a memory block */
/*------------------------------------------------------------------------*/
void ff_memfree (
void* mblock /* Pointer to the memory block to free */
)
{
extern void vPortFree( void *pv );
vPortFree(mblock); /* Discard the memory block with POSIX API */
}
#endif
crazyflie-firmware-src/src/lib/FatFS/unicode.c deleted 100755 → 0
View file @ 6291d058
#include "ff.h"
#if _USE_LFN != 0
#if _CODE_PAGE == 932 /* Japanese Shift_JIS */
#include "cc932.c"
#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */
#include "cc936.c"
#elif _CODE_PAGE == 949 /* Korean */
#include "cc949.c"
#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */
#include "cc950.c"
#else /* Single Byte Character-Set */
#include "ccsbcs.c"
#endif
#endif
crazyflie-firmware-src/src/lib/FreeRTOS/croutine.c deleted 100755 → 0
View file @ 6291d058
/*
FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd.
All rights reserved
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
***************************************************************************
>>! NOTE: The modification to the GPL is included to allow you to !<<
>>! distribute a combined work that includes FreeRTOS without being !<<
>>! obliged to provide the source code for proprietary components !<<
>>! outside of the FreeRTOS kernel. !<<
***************************************************************************
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Full license text is available on the following
link: http://www.freertos.org/a00114.html
***************************************************************************
* *
* FreeRTOS provides completely free yet professionally developed, *
* robust, strictly quality controlled, supported, and cross *
* platform software that is more than just the market leader, it *
* is the industry's de facto standard. *
* *
* Help yourself get started quickly while simultaneously helping *
* to support the FreeRTOS project by purchasing a FreeRTOS *
* tutorial book, reference manual, or both: *
* http://www.FreeRTOS.org/Documentation *
* *
***************************************************************************
http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
the FAQ page "My application does not run, what could be wrong?". Have you
defined configASSERT()?
http://www.FreeRTOS.org/support - In return for receiving this top quality
embedded software for free we request you assist our global community by
participating in the support forum.
http://www.FreeRTOS.org/training - Investing in training allows your team to
be as productive as possible as early as possible. Now you can receive
FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
Ltd, and the world's leading authority on the world's leading RTOS.
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
including FreeRTOS+Trace - an indispensable productivity tool, a DOS
compatible FAT file system, and our tiny thread aware UDP/IP stack.
http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
licenses offer ticketed support, indemnification and commercial middleware.
http://www.SafeRTOS.com - High Integrity Systems also provide a safety
engineered and independently SIL3 certified version for use in safety and
mission critical applications that require provable dependability.
1 tab == 4 spaces!
*/
#include "FreeRTOS.h"
#include "task.h"
#include "croutine.h"
/* Remove the whole file is co-routines are not being used. */
#if( configUSE_CO_ROUTINES != 0 )
/*
* Some kernel aware debuggers require data to be viewed to be global, rather
* than file scope.
*/
#ifdef portREMOVE_STATIC_QUALIFIER
#define static
#endif
/* Lists for ready and blocked co-routines. --------------------*/
static List_t pxReadyCoRoutineLists[ configMAX_CO_ROUTINE_PRIORITIES ]; /*< Prioritised ready co-routines. */
static List_t xDelayedCoRoutineList1; /*< Delayed co-routines. */
static List_t xDelayedCoRoutineList2; /*< Delayed co-routines (two lists are used - one for delays that have overflowed the current tick count. */
static List_t * pxDelayedCoRoutineList; /*< Points to the delayed co-routine list currently being used. */
static List_t * pxOverflowDelayedCoRoutineList; /*< Points to the delayed co-routine list currently being used to hold co-routines that have overflowed the current tick count. */
static List_t xPendingReadyCoRoutineList; /*< Holds co-routines that have been readied by an external event. They cannot be added directly to the ready lists as the ready lists cannot be accessed by interrupts. */
/* Other file private variables. --------------------------------*/
CRCB_t * pxCurrentCoRoutine = NULL;
static UBaseType_t uxTopCoRoutineReadyPriority = 0;
static TickType_t xCoRoutineTickCount = 0, xLastTickCount = 0, xPassedTicks = 0;
/* The initial state of the co-routine when it is created. */
#define corINITIAL_STATE ( 0 )
/*
* Place the co-routine represented by pxCRCB into the appropriate ready queue
* for the priority. It is inserted at the end of the list.
*
* This macro accesses the co-routine ready lists and therefore must not be
* used from within an ISR.
*/
#define prvAddCoRoutineToReadyQueue( pxCRCB ) \
{ \
if( pxCRCB->uxPriority > uxTopCoRoutineReadyPriority ) \
{ \
uxTopCoRoutineReadyPriority = pxCRCB->uxPriority; \
} \
vListInsertEnd( ( List_t * ) &( pxReadyCoRoutineLists[ pxCRCB->uxPriority ] ), &( pxCRCB->xGenericListItem ) ); \
}
/*
* Utility to ready all the lists used by the scheduler. This is called
* automatically upon the creation of the first co-routine.
*/
static void prvInitialiseCoRoutineLists( void );
/*
* Co-routines that are readied by an interrupt cannot be placed directly into
* the ready lists (there is no mutual exclusion). Instead they are placed in
* in the pending ready list in order that they can later be moved to the ready
* list by the co-routine scheduler.
*/
static void prvCheckPendingReadyList( void );
/*
* Macro that looks at the list of co-routines that are currently delayed to
* see if any require waking.
*
* Co-routines are stored in the queue in the order of their wake time -
* meaning once one co-routine has been found whose timer has not expired
* we need not look any further down the list.
*/
static void prvCheckDelayedList( void );
/*-----------------------------------------------------------*/
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex )
{
BaseType_t xReturn;
CRCB_t *pxCoRoutine;
/* Allocate the memory that will store the co-routine control block. */
pxCoRoutine = ( CRCB_t * ) pvPortMalloc( sizeof( CRCB_t ) );
if( pxCoRoutine )
{
/* If pxCurrentCoRoutine is NULL then this is the first co-routine to
be created and the co-routine data structures need initialising. */
if( pxCurrentCoRoutine == NULL )
{
pxCurrentCoRoutine = pxCoRoutine;
prvInitialiseCoRoutineLists();
}
/* Check the priority is within limits. */
if( uxPriority >= configMAX_CO_ROUTINE_PRIORITIES )
{
uxPriority = configMAX_CO_ROUTINE_PRIORITIES - 1;
}
/* Fill out the co-routine control block from the function parameters. */
pxCoRoutine->uxState = corINITIAL_STATE;
pxCoRoutine->uxPriority = uxPriority;
pxCoRoutine->uxIndex = uxIndex;
pxCoRoutine->pxCoRoutineFunction = pxCoRoutineCode;
/* Initialise all the other co-routine control block parameters. */
vListInitialiseItem( &( pxCoRoutine->xGenericListItem ) );
vListInitialiseItem( &( pxCoRoutine->xEventListItem ) );
/* Set the co-routine control block as a link back from the ListItem_t.
This is so we can get back to the containing CRCB from a generic item
in a list. */
listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xGenericListItem ), pxCoRoutine );
listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xEventListItem ), pxCoRoutine );
/* Event lists are always in priority order. */
listSET_LIST_ITEM_VALUE( &( pxCoRoutine->xEventListItem ), ( ( TickType_t ) configMAX_CO_ROUTINE_PRIORITIES - ( TickType_t ) uxPriority ) );
/* Now the co-routine has been initialised it can be added to the ready
list at the correct priority. */
prvAddCoRoutineToReadyQueue( pxCoRoutine );
xReturn = pdPASS;
}
else
{
xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
}
return xReturn;
}
/*-----------------------------------------------------------*/
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList )
{
TickType_t xTimeToWake;
/* Calculate the time to wake - this may overflow but this is
not a problem. */
xTimeToWake = xCoRoutineTickCount + xTicksToDelay;
/* We must remove ourselves from the ready list before adding
ourselves to the blocked list as the same list item is used for
both lists. */
( void ) uxListRemove( ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
/* The list item will be inserted in wake time order. */
listSET_LIST_ITEM_VALUE( &( pxCurrentCoRoutine->xGenericListItem ), xTimeToWake );
if( xTimeToWake < xCoRoutineTickCount )
{
/* Wake time has overflowed. Place this item in the
overflow list. */
vListInsert( ( List_t * ) pxOverflowDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
}
else
{
/* The wake time has not overflowed, so we can use the
current block list. */
vListInsert( ( List_t * ) pxDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) );
}
if( pxEventList )
{
/* Also add the co-routine to an event list. If this is done then the
function must be called with interrupts disabled. */
vListInsert( pxEventList, &( pxCurrentCoRoutine->xEventListItem ) );
}
}
/*-----------------------------------------------------------*/
static void prvCheckPendingReadyList( void )
{
/* Are there any co-routines waiting to get moved to the ready list? These
are co-routines that have been readied by an ISR. The ISR cannot access
the ready lists itself. */
while( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE )
{
CRCB_t *pxUnblockedCRCB;
/* The pending ready list can be accessed by an ISR. */
portDISABLE_INTERRUPTS();
{
pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( (&xPendingReadyCoRoutineList) );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
}
portENABLE_INTERRUPTS();
( void ) uxListRemove( &( pxUnblockedCRCB->xGenericListItem ) );
prvAddCoRoutineToReadyQueue( pxUnblockedCRCB );
}
}
/*-----------------------------------------------------------*/
static void prvCheckDelayedList( void )
{
CRCB_t *pxCRCB;
xPassedTicks = xTaskGetTickCount() - xLastTickCount;
while( xPassedTicks )
{
xCoRoutineTickCount++;
xPassedTicks--;
/* If the tick count has overflowed we need to swap the ready lists. */
if( xCoRoutineTickCount == 0 )
{
List_t * pxTemp;
/* Tick count has overflowed so we need to swap the delay lists. If there are
any items in pxDelayedCoRoutineList here then there is an error! */
pxTemp = pxDelayedCoRoutineList;
pxDelayedCoRoutineList = pxOverflowDelayedCoRoutineList;
pxOverflowDelayedCoRoutineList = pxTemp;
}
/* See if this tick has made a timeout expire. */
while( listLIST_IS_EMPTY( pxDelayedCoRoutineList ) == pdFALSE )
{
pxCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedCoRoutineList );
if( xCoRoutineTickCount < listGET_LIST_ITEM_VALUE( &( pxCRCB->xGenericListItem ) ) )
{
/* Timeout not yet expired. */
break;
}
portDISABLE_INTERRUPTS();
{
/* The event could have occurred just before this critical
section. If this is the case then the generic list item will
have been moved to the pending ready list and the following
line is still valid. Also the pvContainer parameter will have
been set to NULL so the following lines are also valid. */
( void ) uxListRemove( &( pxCRCB->xGenericListItem ) );
/* Is the co-routine waiting on an event also? */
if( pxCRCB->xEventListItem.pvContainer )
{
( void ) uxListRemove( &( pxCRCB->xEventListItem ) );
}
}
portENABLE_INTERRUPTS();
prvAddCoRoutineToReadyQueue( pxCRCB );
}
}
xLastTickCount = xCoRoutineTickCount;
}
/*-----------------------------------------------------------*/
void vCoRoutineSchedule( void )
{
/* See if any co-routines readied by events need moving to the ready lists. */
prvCheckPendingReadyList();
/* See if any delayed co-routines have timed out. */
prvCheckDelayedList();
/* Find the highest priority queue that contains ready co-routines. */
while( listLIST_IS_EMPTY( &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ) )
{
if( uxTopCoRoutineReadyPriority == 0 )
{
/* No more co-routines to check. */
return;
}
--uxTopCoRoutineReadyPriority;
}
/* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines
of the same priority get an equal share of the processor time. */
listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) );
/* Call the co-routine. */
( pxCurrentCoRoutine->pxCoRoutineFunction )( pxCurrentCoRoutine, pxCurrentCoRoutine->uxIndex );
return;
}
/*-----------------------------------------------------------*/
static void prvInitialiseCoRoutineLists( void )
{
UBaseType_t uxPriority;
for( uxPriority = 0; uxPriority < configMAX_CO_ROUTINE_PRIORITIES; uxPriority++ )
{
vListInitialise( ( List_t * ) &( pxReadyCoRoutineLists[ uxPriority ] ) );
}
vListInitialise( ( List_t * ) &xDelayedCoRoutineList1 );
vListInitialise( ( List_t * ) &xDelayedCoRoutineList2 );
vListInitialise( ( List_t * ) &xPendingReadyCoRoutineList );
/* Start with pxDelayedCoRoutineList using list1 and the
pxOverflowDelayedCoRoutineList using list2. */
pxDelayedCoRoutineList = &xDelayedCoRoutineList1;
pxOverflowDelayedCoRoutineList = &xDelayedCoRoutineList2;
}
/*-----------------------------------------------------------*/
BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList )
{
CRCB_t *pxUnblockedCRCB;
BaseType_t xReturn;
/* This function is called from within an interrupt. It can only access
event lists and the pending ready list. This function assumes that a
check has already been made to ensure pxEventList is not empty. */
pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
vListInsertEnd( ( List_t * ) &( xPendingReadyCoRoutineList ), &( pxUnblockedCRCB->xEventListItem ) );
if( pxUnblockedCRCB->uxPriority >= pxCurrentCoRoutine->uxPriority )
{
xReturn = pdTRUE;
}
else
{
xReturn = pdFALSE;
}
return xReturn;
}
#endif /* configUSE_CO_ROUTINES == 0 */
crazyflie-firmware-src/src/lib/FreeRTOS/event_groups.c deleted 100755 → 0
View file @ 6291d058
/*
FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd.
All rights reserved
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
***************************************************************************
>>! NOTE: The modification to the GPL is included to allow you to !<<
>>! distribute a combined work that includes FreeRTOS without being !<<
>>! obliged to provide the source code for proprietary components !<<
>>! outside of the FreeRTOS kernel. !<<
***************************************************************************
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Full license text is available on the following
link: http://www.freertos.org/a00114.html
***************************************************************************
* *
* FreeRTOS provides completely free yet professionally developed, *
* robust, strictly quality controlled, supported, and cross *
* platform software that is more than just the market leader, it *
* is the industry's de facto standard. *
* *
* Help yourself get started quickly while simultaneously helping *
* to support the FreeRTOS project by purchasing a FreeRTOS *
* tutorial book, reference manual, or both: *
* http://www.FreeRTOS.org/Documentation *
* *
***************************************************************************
http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
the FAQ page "My application does not run, what could be wrong?". Have you
defined configASSERT()?
http://www.FreeRTOS.org/support - In return for receiving this top quality
embedded software for free we request you assist our global community by
participating in the support forum.
http://www.FreeRTOS.org/training - Investing in training allows your team to
be as productive as possible as early as possible. Now you can receive
FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
Ltd, and the world's leading authority on the world's leading RTOS.
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
including FreeRTOS+Trace - an indispensable productivity tool, a DOS
compatible FAT file system, and our tiny thread aware UDP/IP stack.
http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
licenses offer ticketed support, indemnification and commercial middleware.
http://www.SafeRTOS.com - High Integrity Systems also provide a safety
engineered and independently SIL3 certified version for use in safety and
mission critical applications that require provable dependability.
1 tab == 4 spaces!
*/
/* Standard includes. */
#include <stdlib.h>
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
all the API functions to use the MPU wrappers. That should only be done when
task.h is included from an application file. */
#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/* FreeRTOS includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "timers.h"
#include "event_groups.h"
/* Lint e961 and e750 are suppressed as a MISRA exception justified because the
MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined for the
header files above, but not in this file, in order to generate the correct
privileged Vs unprivileged linkage and placement. */
#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750. */
#if ( INCLUDE_xEventGroupSetBitFromISR == 1 ) && ( configUSE_TIMERS == 0 )
#error configUSE_TIMERS must be set to 1 to make the xEventGroupSetBitFromISR() function available.
#endif
#if ( INCLUDE_xEventGroupSetBitFromISR == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 0 )
#error INCLUDE_xTimerPendFunctionCall must also be set to one to make the xEventGroupSetBitFromISR() function available.
#endif
/* The following bit fields convey control information in a task's event list
item value. It is important they don't clash with the
taskEVENT_LIST_ITEM_VALUE_IN_USE definition. */
#if configUSE_16_BIT_TICKS == 1
#define eventCLEAR_EVENTS_ON_EXIT_BIT 0x0100U
#define eventUNBLOCKED_DUE_TO_BIT_SET 0x0200U
#define eventWAIT_FOR_ALL_BITS 0x0400U
#define eventEVENT_BITS_CONTROL_BYTES 0xff00U
#else
#define eventCLEAR_EVENTS_ON_EXIT_BIT 0x01000000UL
#define eventUNBLOCKED_DUE_TO_BIT_SET 0x02000000UL
#define eventWAIT_FOR_ALL_BITS 0x04000000UL
#define eventEVENT_BITS_CONTROL_BYTES 0xff000000UL
#endif
typedef struct xEventGroupDefinition
{
EventBits_t uxEventBits;
List_t xTasksWaitingForBits; /*< List of tasks waiting for a bit to be set. */
#if( configUSE_TRACE_FACILITY == 1 )
UBaseType_t uxEventGroupNumber;
#endif
} EventGroup_t;
/*-----------------------------------------------------------*/
/*
* Test the bits set in uxCurrentEventBits to see if the wait condition is met.
* The wait condition is defined by xWaitForAllBits. If xWaitForAllBits is
* pdTRUE then the wait condition is met if all the bits set in uxBitsToWaitFor
* are also set in uxCurrentEventBits. If xWaitForAllBits is pdFALSE then the
* wait condition is met if any of the bits set in uxBitsToWait for are also set
* in uxCurrentEventBits.
*/
static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits, const EventBits_t uxBitsToWaitFor, const BaseType_t xWaitForAllBits );
/*-----------------------------------------------------------*/
EventGroupHandle_t xEventGroupCreate( void )
{
EventGroup_t *pxEventBits;
pxEventBits = ( EventGroup_t * ) pvPortMalloc( sizeof( EventGroup_t ) );
if( pxEventBits != NULL )
{
pxEventBits->uxEventBits = 0;
vListInitialise( &( pxEventBits->xTasksWaitingForBits ) );
traceEVENT_GROUP_CREATE( pxEventBits );
}
else
{
traceEVENT_GROUP_CREATE_FAILED();
}
return ( EventGroupHandle_t ) pxEventBits;
}
/*-----------------------------------------------------------*/
EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait )
{
EventBits_t uxOriginalBitValue, uxReturn;
EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup;
BaseType_t xAlreadyYielded;
BaseType_t xTimeoutOccurred = pdFALSE;
configASSERT( ( uxBitsToWaitFor & eventEVENT_BITS_CONTROL_BYTES ) == 0 );
configASSERT( uxBitsToWaitFor != 0 );
#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
{
configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
}
#endif
vTaskSuspendAll();
{
uxOriginalBitValue = pxEventBits->uxEventBits;
( void ) xEventGroupSetBits( xEventGroup, uxBitsToSet );
if( ( ( uxOriginalBitValue | uxBitsToSet ) & uxBitsToWaitFor ) == uxBitsToWaitFor )
{
/* All the rendezvous bits are now set - no need to block. */
uxReturn = ( uxOriginalBitValue | uxBitsToSet );
/* Rendezvous always clear the bits. They will have been cleared
already unless this is the only task in the rendezvous. */
pxEventBits->uxEventBits &= ~uxBitsToWaitFor;
xTicksToWait = 0;
}
else
{
if( xTicksToWait != ( TickType_t ) 0 )
{
traceEVENT_GROUP_SYNC_BLOCK( xEventGroup, uxBitsToSet, uxBitsToWaitFor );
/* Store the bits that the calling task is waiting for in the
task's event list item so the kernel knows when a match is
found. Then enter the blocked state. */
vTaskPlaceOnUnorderedEventList( &( pxEventBits->xTasksWaitingForBits ), ( uxBitsToWaitFor | eventCLEAR_EVENTS_ON_EXIT_BIT | eventWAIT_FOR_ALL_BITS ), xTicksToWait );
/* This assignment is obsolete as uxReturn will get set after
the task unblocks, but some compilers mistakenly generate a
warning about uxReturn being returned without being set if the
assignment is omitted. */
uxReturn = 0;
}
else
{
/* The rendezvous bits were not set, but no block time was
specified - just return the current event bit value. */
uxReturn = pxEventBits->uxEventBits;
}
}
}
xAlreadyYielded = xTaskResumeAll();
if( xTicksToWait != ( TickType_t ) 0 )
{
if( xAlreadyYielded == pdFALSE )
{
portYIELD_WITHIN_API();
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* The task blocked to wait for its required bits to be set - at this
point either the required bits were set or the block time expired. If
the required bits were set they will have been stored in the task's
event list item, and they should now be retrieved then cleared. */
uxReturn = uxTaskResetEventItemValue();
if( ( uxReturn & eventUNBLOCKED_DUE_TO_BIT_SET ) == ( EventBits_t ) 0 )
{
/* The task timed out, just return the current event bit value. */
taskENTER_CRITICAL();
{
uxReturn = pxEventBits->uxEventBits;
/* Although the task got here because it timed out before the
bits it was waiting for were set, it is possible that since it
unblocked another task has set the bits. If this is the case
then it needs to clear the bits before exiting. */
if( ( uxReturn & uxBitsToWaitFor ) == uxBitsToWaitFor )
{
pxEventBits->uxEventBits &= ~uxBitsToWaitFor;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
taskEXIT_CRITICAL();
xTimeoutOccurred = pdTRUE;
}
else
{
/* The task unblocked because the bits were set. */
}
/* Control bits might be set as the task had blocked should not be
returned. */
uxReturn &= ~eventEVENT_BITS_CONTROL_BYTES;
}
traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred );
return uxReturn;
}
/*-----------------------------------------------------------*/
EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait )
{
EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup;
EventBits_t uxReturn, uxControlBits = 0;
BaseType_t xWaitConditionMet, xAlreadyYielded;
BaseType_t xTimeoutOccurred = pdFALSE;
/* Check the user is not attempting to wait on the bits used by the kernel
itself, and that at least one bit is being requested. */
configASSERT( xEventGroup );
configASSERT( ( uxBitsToWaitFor & eventEVENT_BITS_CONTROL_BYTES ) == 0 );
configASSERT( uxBitsToWaitFor != 0 );
#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
{
configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
}
#endif
vTaskSuspendAll();
{
const EventBits_t uxCurrentEventBits = pxEventBits->uxEventBits;
/* Check to see if the wait condition is already met or not. */
xWaitConditionMet = prvTestWaitCondition( uxCurrentEventBits, uxBitsToWaitFor, xWaitForAllBits );
if( xWaitConditionMet != pdFALSE )
{
/* The wait condition has already been met so there is no need to
block. */
uxReturn = uxCurrentEventBits;
xTicksToWait = ( TickType_t ) 0;
/* Clear the wait bits if requested to do so. */
if( xClearOnExit != pdFALSE )
{
pxEventBits->uxEventBits &= ~uxBitsToWaitFor;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else if( xTicksToWait == ( TickType_t ) 0 )
{
/* The wait condition has not been met, but no block time was
specified, so just return the current value. */
uxReturn = uxCurrentEventBits;
}
else
{
/* The task is going to block to wait for its required bits to be
set. uxControlBits are used to remember the specified behaviour of
this call to xEventGroupWaitBits() - for use when the event bits
unblock the task. */
if( xClearOnExit != pdFALSE )
{
uxControlBits |= eventCLEAR_EVENTS_ON_EXIT_BIT;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
if( xWaitForAllBits != pdFALSE )
{
uxControlBits |= eventWAIT_FOR_ALL_BITS;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* Store the bits that the calling task is waiting for in the
task's event list item so the kernel knows when a match is
found. Then enter the blocked state. */
vTaskPlaceOnUnorderedEventList( &( pxEventBits->xTasksWaitingForBits ), ( uxBitsToWaitFor | uxControlBits ), xTicksToWait );
/* This is obsolete as it will get set after the task unblocks, but
some compilers mistakenly generate a warning about the variable
being returned without being set if it is not done. */
uxReturn = 0;
traceEVENT_GROUP_WAIT_BITS_BLOCK( xEventGroup, uxBitsToWaitFor );
}
}
xAlreadyYielded = xTaskResumeAll();
if( xTicksToWait != ( TickType_t ) 0 )
{
if( xAlreadyYielded == pdFALSE )
{
portYIELD_WITHIN_API();
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* The task blocked to wait for its required bits to be set - at this
point either the required bits were set or the block time expired. If
the required bits were set they will have been stored in the task's
event list item, and they should now be retrieved then cleared. */
uxReturn = uxTaskResetEventItemValue();
if( ( uxReturn & eventUNBLOCKED_DUE_TO_BIT_SET ) == ( EventBits_t ) 0 )
{
taskENTER_CRITICAL();
{
/* The task timed out, just return the current event bit value. */
uxReturn = pxEventBits->uxEventBits;
/* It is possible that the event bits were updated between this
task leaving the Blocked state and running again. */
if( prvTestWaitCondition( uxReturn, uxBitsToWaitFor, xWaitForAllBits ) != pdFALSE )
{
if( xClearOnExit != pdFALSE )
{
pxEventBits->uxEventBits &= ~uxBitsToWaitFor;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
taskEXIT_CRITICAL();
/* Prevent compiler warnings when trace macros are not used. */
xTimeoutOccurred = pdFALSE;
}
else
{
/* The task unblocked because the bits were set. */
}
/* The task blocked so control bits may have been set. */
uxReturn &= ~eventEVENT_BITS_CONTROL_BYTES;
}
traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred );
return uxReturn;
}
/*-----------------------------------------------------------*/
EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear )
{
EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup;
EventBits_t uxReturn;
/* Check the user is not attempting to clear the bits used by the kernel
itself. */
configASSERT( xEventGroup );
configASSERT( ( uxBitsToClear & eventEVENT_BITS_CONTROL_BYTES ) == 0 );
taskENTER_CRITICAL();
{
traceEVENT_GROUP_CLEAR_BITS( xEventGroup, uxBitsToClear );
/* The value returned is the event group value prior to the bits being
cleared. */
uxReturn = pxEventBits->uxEventBits;
/* Clear the bits. */
pxEventBits->uxEventBits &= ~uxBitsToClear;
}
taskEXIT_CRITICAL();
return uxReturn;
}
/*-----------------------------------------------------------*/
#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) )
BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear )
{
BaseType_t xReturn;
traceEVENT_GROUP_CLEAR_BITS_FROM_ISR( xEventGroup, uxBitsToClear );
xReturn = xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToClear, NULL );
return xReturn;
}
#endif
/*-----------------------------------------------------------*/
EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup )
{
UBaseType_t uxSavedInterruptStatus;
EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup;
EventBits_t uxReturn;
uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
{
uxReturn = pxEventBits->uxEventBits;
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
return uxReturn;
}
/*-----------------------------------------------------------*/
EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet )
{
ListItem_t *pxListItem, *pxNext;
ListItem_t const *pxListEnd;
List_t *pxList;
EventBits_t uxBitsToClear = 0, uxBitsWaitedFor, uxControlBits;
EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup;
BaseType_t xMatchFound = pdFALSE;
/* Check the user is not attempting to set the bits used by the kernel
itself. */
configASSERT( xEventGroup );
configASSERT( ( uxBitsToSet & eventEVENT_BITS_CONTROL_BYTES ) == 0 );
pxList = &( pxEventBits->xTasksWaitingForBits );
pxListEnd = listGET_END_MARKER( pxList ); /*lint !e826 !e740 The mini list structure is used as the list end to save RAM. This is checked and valid. */
vTaskSuspendAll();
{
traceEVENT_GROUP_SET_BITS( xEventGroup, uxBitsToSet );
pxListItem = listGET_HEAD_ENTRY( pxList );
/* Set the bits. */
pxEventBits->uxEventBits |= uxBitsToSet;
/* See if the new bit value should unblock any tasks. */
while( pxListItem != pxListEnd )
{
pxNext = listGET_NEXT( pxListItem );
uxBitsWaitedFor = listGET_LIST_ITEM_VALUE( pxListItem );
xMatchFound = pdFALSE;
/* Split the bits waited for from the control bits. */
uxControlBits = uxBitsWaitedFor & eventEVENT_BITS_CONTROL_BYTES;
uxBitsWaitedFor &= ~eventEVENT_BITS_CONTROL_BYTES;
if( ( uxControlBits & eventWAIT_FOR_ALL_BITS ) == ( EventBits_t ) 0 )
{
/* Just looking for single bit being set. */
if( ( uxBitsWaitedFor & pxEventBits->uxEventBits ) != ( EventBits_t ) 0 )
{
xMatchFound = pdTRUE;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else if( ( uxBitsWaitedFor & pxEventBits->uxEventBits ) == uxBitsWaitedFor )
{
/* All bits are set. */
xMatchFound = pdTRUE;
}
else
{
/* Need all bits to be set, but not all the bits were set. */
}
if( xMatchFound != pdFALSE )
{
/* The bits match. Should the bits be cleared on exit? */
if( ( uxControlBits & eventCLEAR_EVENTS_ON_EXIT_BIT ) != ( EventBits_t ) 0 )
{
uxBitsToClear |= uxBitsWaitedFor;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
/* Store the actual event flag value in the task's event list
item before removing the task from the event list. The
eventUNBLOCKED_DUE_TO_BIT_SET bit is set so the task knows
that is was unblocked due to its required bits matching, rather
than because it timed out. */
( void ) xTaskRemoveFromUnorderedEventList( pxListItem, pxEventBits->uxEventBits | eventUNBLOCKED_DUE_TO_BIT_SET );
}
/* Move onto the next list item. Note pxListItem->pxNext is not
used here as the list item may have been removed from the event list
and inserted into the ready/pending reading list. */
pxListItem = pxNext;
}
/* Clear any bits that matched when the eventCLEAR_EVENTS_ON_EXIT_BIT
bit was set in the control word. */
pxEventBits->uxEventBits &= ~uxBitsToClear;
}
( void ) xTaskResumeAll();
return pxEventBits->uxEventBits;
}
/*-----------------------------------------------------------*/
void vEventGroupDelete( EventGroupHandle_t xEventGroup )
{
EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup;
const List_t *pxTasksWaitingForBits = &( pxEventBits->xTasksWaitingForBits );
vTaskSuspendAll();
{
traceEVENT_GROUP_DELETE( xEventGroup );
while( listCURRENT_LIST_LENGTH( pxTasksWaitingForBits ) > ( UBaseType_t ) 0 )
{
/* Unblock the task, returning 0 as the event list is being deleted
and cannot therefore have any bits set. */
configASSERT( pxTasksWaitingForBits->xListEnd.pxNext != ( ListItem_t * ) &( pxTasksWaitingForBits->xListEnd ) );
( void ) xTaskRemoveFromUnorderedEventList( pxTasksWaitingForBits->xListEnd.pxNext, eventUNBLOCKED_DUE_TO_BIT_SET );
}
vPortFree( pxEventBits );
}
( void ) xTaskResumeAll();
}
/*-----------------------------------------------------------*/
/* For internal use only - execute a 'set bits' command that was pended from
an interrupt. */
void vEventGroupSetBitsCallback( void *pvEventGroup, const uint32_t ulBitsToSet )
{
( void ) xEventGroupSetBits( pvEventGroup, ( EventBits_t ) ulBitsToSet );
}
/*-----------------------------------------------------------*/
/* For internal use only - execute a 'clear bits' command that was pended from
an interrupt. */
void vEventGroupClearBitsCallback( void *pvEventGroup, const uint32_t ulBitsToClear )
{
( void ) xEventGroupClearBits( pvEventGroup, ( EventBits_t ) ulBitsToClear );
}
/*-----------------------------------------------------------*/
static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits, const EventBits_t uxBitsToWaitFor, const BaseType_t xWaitForAllBits )
{
BaseType_t xWaitConditionMet = pdFALSE;
if( xWaitForAllBits == pdFALSE )
{
/* Task only has to wait for one bit within uxBitsToWaitFor to be
set. Is one already set? */
if( ( uxCurrentEventBits & uxBitsToWaitFor ) != ( EventBits_t ) 0 )
{
xWaitConditionMet = pdTRUE;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
else
{
/* Task has to wait for all the bits in uxBitsToWaitFor to be set.
Are they set already? */
if( ( uxCurrentEventBits & uxBitsToWaitFor ) == uxBitsToWaitFor )
{
xWaitConditionMet = pdTRUE;
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
return xWaitConditionMet;
}
/*-----------------------------------------------------------*/
#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) )
BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken )
{
BaseType_t xReturn;
traceEVENT_GROUP_SET_BITS_FROM_ISR( xEventGroup, uxBitsToSet );
xReturn = xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToSet, pxHigherPriorityTaskWoken );
return xReturn;
}
#endif
/*-----------------------------------------------------------*/
#if (configUSE_TRACE_FACILITY == 1)
UBaseType_t uxEventGroupGetNumber( void* xEventGroup )
{
UBaseType_t xReturn;
EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup;
if( xEventGroup == NULL )
{
xReturn = 0;
}
else
{
xReturn = pxEventBits->uxEventGroupNumber;
}
return xReturn;
}
#endif
crazyflie-firmware-src/src/lib/FreeRTOS/include/FreeRTOS.h deleted 100755 → 0
View file @ 6291d058
/*
FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd.
All rights reserved
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
***************************************************************************
>>! NOTE: The modification to the GPL is included to allow you to !<<
>>! distribute a combined work that includes FreeRTOS without being !<<
>>! obliged to provide the source code for proprietary components !<<
>>! outside of the FreeRTOS kernel. !<<
***************************************************************************
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Full license text is available on the following
link: http://www.freertos.org/a00114.html
***************************************************************************
* *
* FreeRTOS provides completely free yet professionally developed, *
* robust, strictly quality controlled, supported, and cross *
* platform software that is more than just the market leader, it *
* is the industry's de facto standard. *
* *
* Help yourself get started quickly while simultaneously helping *
* to support the FreeRTOS project by purchasing a FreeRTOS *
* tutorial book, reference manual, or both: *
* http://www.FreeRTOS.org/Documentation *
* *
***************************************************************************
http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
the FAQ page "My application does not run, what could be wrong?". Have you
defined configASSERT()?
http://www.FreeRTOS.org/support - In return for receiving this top quality
embedded software for free we request you assist our global community by
participating in the support forum.
http://www.FreeRTOS.org/training - Investing in training allows your team to
be as productive as possible as early as possible. Now you can receive
FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
Ltd, and the world's leading authority on the world's leading RTOS.
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
including FreeRTOS+Trace - an indispensable productivity tool, a DOS
compatible FAT file system, and our tiny thread aware UDP/IP stack.
http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
licenses offer ticketed support, indemnification and commercial middleware.
http://www.SafeRTOS.com - High Integrity Systems also provide a safety
engineered and independently SIL3 certified version for use in safety and
mission critical applications that require provable dependability.
1 tab == 4 spaces!
*/
#ifndef INC_FREERTOS_H
#define INC_FREERTOS_H
/*
* Include the generic headers required for the FreeRTOS port being used.
*/
#include <stddef.h>
/*
* If stdint.h cannot be located then:
* + If using GCC ensure the -nostdint options is *not* being used.
* + Ensure the project's include path includes the directory in which your
* compiler stores stdint.h.
* + Set any compiler options necessary for it to support C99, as technically
* stdint.h is only mandatory with C99 (FreeRTOS does not require C99 in any
* other way).
* + The FreeRTOS download includes a simple stdint.h definition that can be
* used in cases where none is provided by the compiler. The files only
* contains the typedefs required to build FreeRTOS. Read the instructions
* in FreeRTOS/source/stdint.readme for more information.
*/
#include <stdint.h> /* READ COMMENT ABOVE. */
#ifdef __cplusplus
extern "C" {
#endif
/* Application specific configuration options. */
#include "FreeRTOSConfig.h"
/* Basic FreeRTOS definitions. */
#include "projdefs.h"
/* Definitions specific to the port being used. */
#include "portable.h"
/*
* Check all the required application specific macros have been defined.
* These macros are application specific and (as downloaded) are defined
* within FreeRTOSConfig.h.
*/
#ifndef configMINIMAL_STACK_SIZE
#error Missing definition: configMINIMAL_STACK_SIZE must be defined in FreeRTOSConfig.h. configMINIMAL_STACK_SIZE defines the size (in words) of the stack allocated to the idle task. Refer to the demo project provided for your port for a suitable value.
#endif
#ifndef configMAX_PRIORITIES
#error Missing definition: configMAX_PRIORITIES must be defined in FreeRTOSConfig.h. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef configUSE_PREEMPTION
#error Missing definition: configUSE_PREEMPTION must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef configUSE_IDLE_HOOK
#error Missing definition: configUSE_IDLE_HOOK must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef configUSE_TICK_HOOK
#error Missing definition: configUSE_TICK_HOOK must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef INCLUDE_vTaskPrioritySet
#error Missing definition: INCLUDE_vTaskPrioritySet must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef INCLUDE_uxTaskPriorityGet
#error Missing definition: INCLUDE_uxTaskPriorityGet must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef INCLUDE_vTaskDelete
#error Missing definition: INCLUDE_vTaskDelete must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef INCLUDE_vTaskSuspend
#error Missing definition: INCLUDE_vTaskSuspend must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef INCLUDE_vTaskDelayUntil
#error Missing definition: INCLUDE_vTaskDelayUntil must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef INCLUDE_vTaskDelay
#error Missing definition: INCLUDE_vTaskDelay must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef configUSE_16_BIT_TICKS
#error Missing definition: configUSE_16_BIT_TICKS must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details.
#endif
#ifndef configMAX_PRIORITIES
#error configMAX_PRIORITIES must be defined to be greater than or equal to 1.
#endif
#ifndef configUSE_CO_ROUTINES
#define configUSE_CO_ROUTINES 0
#endif
#if configUSE_CO_ROUTINES != 0
#ifndef configMAX_CO_ROUTINE_PRIORITIES
#error configMAX_CO_ROUTINE_PRIORITIES must be greater than or equal to 1.
#endif
#endif
#ifndef INCLUDE_xTaskGetIdleTaskHandle
#define INCLUDE_xTaskGetIdleTaskHandle 0
#endif
#ifndef INCLUDE_xTimerGetTimerDaemonTaskHandle
#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0
#endif
#ifndef INCLUDE_xQueueGetMutexHolder
#define INCLUDE_xQueueGetMutexHolder 0
#endif
#ifndef INCLUDE_xSemaphoreGetMutexHolder
#define INCLUDE_xSemaphoreGetMutexHolder INCLUDE_xQueueGetMutexHolder
#endif
#ifndef INCLUDE_pcTaskGetTaskName
#define INCLUDE_pcTaskGetTaskName 0
#endif
#ifndef configUSE_APPLICATION_TASK_TAG
#define configUSE_APPLICATION_TASK_TAG 0
#endif
#ifndef configNUM_THREAD_LOCAL_STORAGE_POINTERS
#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0
#endif
#ifndef INCLUDE_uxTaskGetStackHighWaterMark
#define INCLUDE_uxTaskGetStackHighWaterMark 0
#endif
#ifndef INCLUDE_eTaskGetState
#define INCLUDE_eTaskGetState 0
#endif
#ifndef configUSE_RECURSIVE_MUTEXES
#define configUSE_RECURSIVE_MUTEXES 0
#endif
#ifndef configUSE_MUTEXES
#define configUSE_MUTEXES 0
#endif
#ifndef configUSE_TIMERS
#define configUSE_TIMERS 0
#endif
#ifndef configUSE_COUNTING_SEMAPHORES
#define configUSE_COUNTING_SEMAPHORES 0
#endif
#ifndef configUSE_ALTERNATIVE_API
#define configUSE_ALTERNATIVE_API 0
#endif
#ifndef portCRITICAL_NESTING_IN_TCB
#define portCRITICAL_NESTING_IN_TCB 0
#endif
#ifndef configMAX_TASK_NAME_LEN
#define configMAX_TASK_NAME_LEN 16
#endif
#ifndef configIDLE_SHOULD_YIELD
#define configIDLE_SHOULD_YIELD 1
#endif
#if configMAX_TASK_NAME_LEN < 1
#error configMAX_TASK_NAME_LEN must be set to a minimum of 1 in FreeRTOSConfig.h
#endif
#ifndef INCLUDE_xTaskResumeFromISR
#define INCLUDE_xTaskResumeFromISR 1
#endif
#ifndef INCLUDE_xEventGroupSetBitFromISR
#define INCLUDE_xEventGroupSetBitFromISR 0
#endif
#ifndef INCLUDE_xTimerPendFunctionCall
#define INCLUDE_xTimerPendFunctionCall 0
#endif
#ifndef configASSERT
#define configASSERT( x )
#define configASSERT_DEFINED 0
#else
#define configASSERT_DEFINED 1
#endif
/* The timers module relies on xTaskGetSchedulerState(). */
#if configUSE_TIMERS == 1
#ifndef configTIMER_TASK_PRIORITY
#error If configUSE_TIMERS is set to 1 then configTIMER_TASK_PRIORITY must also be defined.
#endif /* configTIMER_TASK_PRIORITY */
#ifndef configTIMER_QUEUE_LENGTH
#error If configUSE_TIMERS is set to 1 then configTIMER_QUEUE_LENGTH must also be defined.
#endif /* configTIMER_QUEUE_LENGTH */
#ifndef configTIMER_TASK_STACK_DEPTH
#error If configUSE_TIMERS is set to 1 then configTIMER_TASK_STACK_DEPTH must also be defined.
#endif /* configTIMER_TASK_STACK_DEPTH */
#endif /* configUSE_TIMERS */
#ifndef INCLUDE_xTaskGetSchedulerState
#define INCLUDE_xTaskGetSchedulerState 0
#endif
#ifndef INCLUDE_xTaskGetCurrentTaskHandle
#define INCLUDE_xTaskGetCurrentTaskHandle 0
#endif
#ifndef portSET_INTERRUPT_MASK_FROM_ISR
#define portSET_INTERRUPT_MASK_FROM_ISR() 0
#endif
#ifndef portCLEAR_INTERRUPT_MASK_FROM_ISR
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue ) ( void ) uxSavedStatusValue
#endif
#ifndef portCLEAN_UP_TCB
#define portCLEAN_UP_TCB( pxTCB ) ( void ) pxTCB
#endif
#ifndef portPRE_TASK_DELETE_HOOK
#define portPRE_TASK_DELETE_HOOK( pvTaskToDelete, pxYieldPending )
#endif
#ifndef portSETUP_TCB
#define portSETUP_TCB( pxTCB ) ( void ) pxTCB
#endif
#ifndef configQUEUE_REGISTRY_SIZE
#define configQUEUE_REGISTRY_SIZE 0U
#endif
#if ( configQUEUE_REGISTRY_SIZE < 1 )
#define vQueueAddToRegistry( xQueue, pcName )
#define vQueueUnregisterQueue( xQueue )
#endif
#ifndef portPOINTER_SIZE_TYPE
#define portPOINTER_SIZE_TYPE uint32_t
#endif
/* Remove any unused trace macros. */
#ifndef traceSTART
/* Used to perform any necessary initialisation - for example, open a file
into which trace is to be written. */
#define traceSTART()
#endif
#ifndef traceEND
/* Use to close a trace, for example close a file into which trace has been
written. */
#define traceEND()
#endif
#ifndef traceTASK_SWITCHED_IN
/* Called after a task has been selected to run. pxCurrentTCB holds a pointer
to the task control block of the selected task. */
#define traceTASK_SWITCHED_IN()
#endif
#ifndef traceINCREASE_TICK_COUNT
/* Called before stepping the tick count after waking from tickless idle
sleep. */
#define traceINCREASE_TICK_COUNT( x )
#endif
#ifndef traceLOW_POWER_IDLE_BEGIN
/* Called immediately before entering tickless idle. */
#define traceLOW_POWER_IDLE_BEGIN()
#endif
#ifndef traceLOW_POWER_IDLE_END
/* Called when returning to the Idle task after a tickless idle. */
#define traceLOW_POWER_IDLE_END()
#endif
#ifndef traceTASK_SWITCHED_OUT
/* Called before a task has been selected to run. pxCurrentTCB holds a pointer
to the task control block of the task being switched out. */
#define traceTASK_SWITCHED_OUT()
#endif
#ifndef traceTASK_PRIORITY_INHERIT
/* Called when a task attempts to take a mutex that is already held by a
lower priority task. pxTCBOfMutexHolder is a pointer to the TCB of the task
that holds the mutex. uxInheritedPriority is the priority the mutex holder
will inherit (the priority of the task that is attempting to obtain the
muted. */
#define traceTASK_PRIORITY_INHERIT( pxTCBOfMutexHolder, uxInheritedPriority )
#endif
#ifndef traceTASK_PRIORITY_DISINHERIT
/* Called when a task releases a mutex, the holding of which had resulted in
the task inheriting the priority of a higher priority task.
pxTCBOfMutexHolder is a pointer to the TCB of the task that is releasing the
mutex. uxOriginalPriority is the task's configured (base) priority. */
#define traceTASK_PRIORITY_DISINHERIT( pxTCBOfMutexHolder, uxOriginalPriority )
#endif
#ifndef traceBLOCKING_ON_QUEUE_RECEIVE
/* Task is about to block because it cannot read from a
queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore
upon which the read was attempted. pxCurrentTCB points to the TCB of the
task that attempted the read. */
#define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue )
#endif
#ifndef traceBLOCKING_ON_QUEUE_SEND
/* Task is about to block because it cannot write to a
queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore
upon which the write was attempted. pxCurrentTCB points to the TCB of the
task that attempted the write. */
#define traceBLOCKING_ON_QUEUE_SEND( pxQueue )
#endif
#ifndef configCHECK_FOR_STACK_OVERFLOW
#define configCHECK_FOR_STACK_OVERFLOW 0
#endif
/* The following event macros are embedded in the kernel API calls. */
#ifndef traceMOVED_TASK_TO_READY_STATE
#define traceMOVED_TASK_TO_READY_STATE( pxTCB )
#endif
#ifndef traceQUEUE_CREATE
#define traceQUEUE_CREATE( pxNewQueue )
#endif
#ifndef traceQUEUE_CREATE_FAILED
#define traceQUEUE_CREATE_FAILED( ucQueueType )
#endif
#ifndef traceCREATE_MUTEX
#define traceCREATE_MUTEX( pxNewQueue )
#endif
#ifndef traceCREATE_MUTEX_FAILED
#define traceCREATE_MUTEX_FAILED()
#endif
#ifndef traceGIVE_MUTEX_RECURSIVE
#define traceGIVE_MUTEX_RECURSIVE( pxMutex )
#endif
#ifndef traceGIVE_MUTEX_RECURSIVE_FAILED
#define traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex )
#endif
#ifndef traceTAKE_MUTEX_RECURSIVE
#define traceTAKE_MUTEX_RECURSIVE( pxMutex )
#endif
#ifndef traceTAKE_MUTEX_RECURSIVE_FAILED
#define traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex )
#endif
#ifndef traceCREATE_COUNTING_SEMAPHORE
#define traceCREATE_COUNTING_SEMAPHORE()
#endif
#ifndef traceCREATE_COUNTING_SEMAPHORE_FAILED
#define traceCREATE_COUNTING_SEMAPHORE_FAILED()
#endif
#ifndef traceQUEUE_SEND
#define traceQUEUE_SEND( pxQueue )
#endif
#ifndef traceQUEUE_SEND_FAILED
#define traceQUEUE_SEND_FAILED( pxQueue )
#endif
#ifndef traceQUEUE_RECEIVE
#define traceQUEUE_RECEIVE( pxQueue )
#endif
#ifndef traceQUEUE_PEEK
#define traceQUEUE_PEEK( pxQueue )
#endif
#ifndef traceQUEUE_PEEK_FROM_ISR
#define traceQUEUE_PEEK_FROM_ISR( pxQueue )
#endif
#ifndef traceQUEUE_RECEIVE_FAILED
#define traceQUEUE_RECEIVE_FAILED( pxQueue )
#endif
#ifndef traceQUEUE_SEND_FROM_ISR
#define traceQUEUE_SEND_FROM_ISR( pxQueue )
#endif
#ifndef traceQUEUE_SEND_FROM_ISR_FAILED
#define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue )
#endif
#ifndef traceQUEUE_RECEIVE_FROM_ISR
#define traceQUEUE_RECEIVE_FROM_ISR( pxQueue )
#endif
#ifndef traceQUEUE_RECEIVE_FROM_ISR_FAILED
#define traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue )
#endif
#ifndef traceQUEUE_PEEK_FROM_ISR_FAILED
#define traceQUEUE_PEEK_FROM_ISR_FAILED( pxQueue )
#endif
#ifndef traceQUEUE_DELETE
#define traceQUEUE_DELETE( pxQueue )
#endif
#ifndef traceTASK_CREATE
#define traceTASK_CREATE( pxNewTCB )
#endif
#ifndef traceTASK_CREATE_FAILED
#define traceTASK_CREATE_FAILED()
#endif
#ifndef traceTASK_DELETE
#define traceTASK_DELETE( pxTaskToDelete )
#endif
#ifndef traceTASK_DELAY_UNTIL
#define traceTASK_DELAY_UNTIL()
#endif
#ifndef traceTASK_DELAY
#define traceTASK_DELAY()
#endif
#ifndef traceTASK_PRIORITY_SET
#define traceTASK_PRIORITY_SET( pxTask, uxNewPriority )
#endif
#ifndef traceTASK_SUSPEND
#define traceTASK_SUSPEND( pxTaskToSuspend )
#endif
#ifndef traceTASK_RESUME
#define traceTASK_RESUME( pxTaskToResume )
#endif
#ifndef traceTASK_RESUME_FROM_ISR
#define traceTASK_RESUME_FROM_ISR( pxTaskToResume )
#endif
#ifndef traceTASK_INCREMENT_TICK
#define traceTASK_INCREMENT_TICK( xTickCount )
#endif
#ifndef traceTIMER_CREATE
#define traceTIMER_CREATE( pxNewTimer )
#endif
#ifndef traceTIMER_CREATE_FAILED
#define traceTIMER_CREATE_FAILED()
#endif
#ifndef traceTIMER_COMMAND_SEND
#define traceTIMER_COMMAND_SEND( xTimer, xMessageID, xMessageValueValue, xReturn )
#endif
#ifndef traceTIMER_EXPIRED
#define traceTIMER_EXPIRED( pxTimer )
#endif
#ifndef traceTIMER_COMMAND_RECEIVED
#define traceTIMER_COMMAND_RECEIVED( pxTimer, xMessageID, xMessageValue )
#endif
#ifndef traceMALLOC
#define traceMALLOC( pvAddress, uiSize )
#endif
#ifndef traceFREE
#define traceFREE( pvAddress, uiSize )
#endif
#ifndef traceEVENT_GROUP_CREATE
#define traceEVENT_GROUP_CREATE( xEventGroup )
#endif
#ifndef traceEVENT_GROUP_CREATE_FAILED
#define traceEVENT_GROUP_CREATE_FAILED()
#endif
#ifndef traceEVENT_GROUP_SYNC_BLOCK
#define traceEVENT_GROUP_SYNC_BLOCK( xEventGroup, uxBitsToSet, uxBitsToWaitFor )
#endif
#ifndef traceEVENT_GROUP_SYNC_END
#define traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred ) ( void ) xTimeoutOccurred
#endif
#ifndef traceEVENT_GROUP_WAIT_BITS_BLOCK
#define traceEVENT_GROUP_WAIT_BITS_BLOCK( xEventGroup, uxBitsToWaitFor )
#endif
#ifndef traceEVENT_GROUP_WAIT_BITS_END
#define traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred ) ( void ) xTimeoutOccurred
#endif
#ifndef traceEVENT_GROUP_CLEAR_BITS
#define traceEVENT_GROUP_CLEAR_BITS( xEventGroup, uxBitsToClear )
#endif
#ifndef traceEVENT_GROUP_CLEAR_BITS_FROM_ISR
#define traceEVENT_GROUP_CLEAR_BITS_FROM_ISR( xEventGroup, uxBitsToClear )
#endif
#ifndef traceEVENT_GROUP_SET_BITS
#define traceEVENT_GROUP_SET_BITS( xEventGroup, uxBitsToSet )
#endif
#ifndef traceEVENT_GROUP_SET_BITS_FROM_ISR
#define traceEVENT_GROUP_SET_BITS_FROM_ISR( xEventGroup, uxBitsToSet )
#endif
#ifndef traceEVENT_GROUP_DELETE
#define traceEVENT_GROUP_DELETE( xEventGroup )
#endif
#ifndef tracePEND_FUNC_CALL
#define tracePEND_FUNC_CALL(xFunctionToPend, pvParameter1, ulParameter2, ret)
#endif
#ifndef tracePEND_FUNC_CALL_FROM_ISR
#define tracePEND_FUNC_CALL_FROM_ISR(xFunctionToPend, pvParameter1, ulParameter2, ret)
#endif
#ifndef traceQUEUE_REGISTRY_ADD
#define traceQUEUE_REGISTRY_ADD(xQueue, pcQueueName)
#endif
#ifndef traceTASK_NOTIFY_TAKE_BLOCK
#define traceTASK_NOTIFY_TAKE_BLOCK()
#endif
#ifndef traceTASK_NOTIFY_TAKE
#define traceTASK_NOTIFY_TAKE()
#endif
#ifndef traceTASK_NOTIFY_WAIT_BLOCK
#define traceTASK_NOTIFY_WAIT_BLOCK()
#endif
#ifndef traceTASK_NOTIFY_WAIT
#define traceTASK_NOTIFY_WAIT()
#endif
#ifndef traceTASK_NOTIFY
#define traceTASK_NOTIFY()
#endif
#ifndef traceTASK_NOTIFY_FROM_ISR
#define traceTASK_NOTIFY_FROM_ISR()
#endif
#ifndef traceTASK_NOTIFY_GIVE_FROM_ISR
#define traceTASK_NOTIFY_GIVE_FROM_ISR()
#endif
#ifndef configGENERATE_RUN_TIME_STATS
#define configGENERATE_RUN_TIME_STATS 0
#endif
#if ( configGENERATE_RUN_TIME_STATS == 1 )
#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS
#error If configGENERATE_RUN_TIME_STATS is defined then portCONFIGURE_TIMER_FOR_RUN_TIME_STATS must also be defined. portCONFIGURE_TIMER_FOR_RUN_TIME_STATS should call a port layer function to setup a peripheral timer/counter that can then be used as the run time counter time base.
#endif /* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS */
#ifndef portGET_RUN_TIME_COUNTER_VALUE
#ifndef portALT_GET_RUN_TIME_COUNTER_VALUE
#error If configGENERATE_RUN_TIME_STATS is defined then either portGET_RUN_TIME_COUNTER_VALUE or portALT_GET_RUN_TIME_COUNTER_VALUE must also be defined. See the examples provided and the FreeRTOS web site for more information.
#endif /* portALT_GET_RUN_TIME_COUNTER_VALUE */
#endif /* portGET_RUN_TIME_COUNTER_VALUE */
#endif /* configGENERATE_RUN_TIME_STATS */
#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS()
#endif
#ifndef configUSE_MALLOC_FAILED_HOOK
#define configUSE_MALLOC_FAILED_HOOK 0
#endif
#ifndef portPRIVILEGE_BIT
#define portPRIVILEGE_BIT ( ( UBaseType_t ) 0x00 )
#endif
#ifndef portYIELD_WITHIN_API
#define portYIELD_WITHIN_API portYIELD
#endif
#ifndef pvPortMallocAligned
#define pvPortMallocAligned( x, puxStackBuffer ) ( ( ( puxStackBuffer ) == NULL ) ? ( pvPortMalloc( ( x ) ) ) : ( puxStackBuffer ) )
#endif
#ifndef vPortFreeAligned
#define vPortFreeAligned( pvBlockToFree ) vPortFree( pvBlockToFree )
#endif
#ifndef portSUPPRESS_TICKS_AND_SLEEP
#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime )
#endif
#ifndef configEXPECTED_IDLE_TIME_BEFORE_SLEEP
#define configEXPECTED_IDLE_TIME_BEFORE_SLEEP 2
#endif
#if configEXPECTED_IDLE_TIME_BEFORE_SLEEP < 2
#error configEXPECTED_IDLE_TIME_BEFORE_SLEEP must not be less than 2
#endif
#ifndef configUSE_TICKLESS_IDLE
#define configUSE_TICKLESS_IDLE 0
#endif
#ifndef configPRE_SLEEP_PROCESSING
#define configPRE_SLEEP_PROCESSING( x )
#endif
#ifndef configPOST_SLEEP_PROCESSING
#define configPOST_SLEEP_PROCESSING( x )
#endif
#ifndef configUSE_QUEUE_SETS
#define configUSE_QUEUE_SETS 0
#endif
#ifndef portTASK_USES_FLOATING_POINT
#define portTASK_USES_FLOATING_POINT()
#endif
#ifndef configUSE_TIME_SLICING
#define configUSE_TIME_SLICING 1
#endif
#ifndef configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS
#define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0
#endif
#ifndef configUSE_NEWLIB_REENTRANT
#define configUSE_NEWLIB_REENTRANT 0
#endif
#ifndef configUSE_STATS_FORMATTING_FUNCTIONS
#define configUSE_STATS_FORMATTING_FUNCTIONS 0
#endif
#ifndef portASSERT_IF_INTERRUPT_PRIORITY_INVALID
#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID()
#endif
#ifndef configUSE_TRACE_FACILITY
#define configUSE_TRACE_FACILITY 0
#endif
#ifndef mtCOVERAGE_TEST_MARKER
#define mtCOVERAGE_TEST_MARKER()
#endif
#ifndef mtCOVERAGE_TEST_DELAY
#define mtCOVERAGE_TEST_DELAY()
#endif
#ifndef portASSERT_IF_IN_ISR
#define portASSERT_IF_IN_ISR()
#endif
#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
#endif
#ifndef configAPPLICATION_ALLOCATED_HEAP
#define configAPPLICATION_ALLOCATED_HEAP 0
#endif
#ifndef configUSE_TASK_NOTIFICATIONS
#define configUSE_TASK_NOTIFICATIONS 1
#endif
#ifndef portTICK_TYPE_IS_ATOMIC
#define portTICK_TYPE_IS_ATOMIC 0
#endif
#if( portTICK_TYPE_IS_ATOMIC == 0 )
/* Either variables of tick type cannot be read atomically, or
portTICK_TYPE_IS_ATOMIC was not set - map the critical sections used when
the tick count is returned to the standard critical section macros. */
#define portTICK_TYPE_ENTER_CRITICAL() portENTER_CRITICAL()
#define portTICK_TYPE_EXIT_CRITICAL() portEXIT_CRITICAL()
#define portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR() portSET_INTERRUPT_MASK_FROM_ISR()
#define portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( x ) portCLEAR_INTERRUPT_MASK_FROM_ISR( ( x ) )
#else
/* The tick type can be read atomically, so critical sections used when the
tick count is returned can be defined away. */
#define portTICK_TYPE_ENTER_CRITICAL()
#define portTICK_TYPE_EXIT_CRITICAL()
#define portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR() 0
#define portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( x ) ( void ) x
#endif
/* Definitions to allow backward compatibility with FreeRTOS versions prior to
V8 if desired. */
#ifndef configENABLE_BACKWARD_COMPATIBILITY
#define configENABLE_BACKWARD_COMPATIBILITY 1
#endif
#if configENABLE_BACKWARD_COMPATIBILITY == 1
#define eTaskStateGet eTaskGetState
#define portTickType TickType_t
#define xTaskHandle TaskHandle_t
#define xQueueHandle QueueHandle_t
#define xSemaphoreHandle SemaphoreHandle_t
#define xQueueSetHandle QueueSetHandle_t
#define xQueueSetMemberHandle QueueSetMemberHandle_t
#define xTimeOutType TimeOut_t
#define xMemoryRegion MemoryRegion_t
#define xTaskParameters TaskParameters_t
#define xTaskStatusType TaskStatus_t
#define xTimerHandle TimerHandle_t
#define xCoRoutineHandle CoRoutineHandle_t
#define pdTASK_HOOK_CODE TaskHookFunction_t
#define portTICK_RATE_MS portTICK_PERIOD_MS
/* Backward compatibility within the scheduler code only - these definitions
are not really required but are included for completeness. */
#define tmrTIMER_CALLBACK TimerCallbackFunction_t
#define pdTASK_CODE TaskFunction_t
#define xListItem ListItem_t
#define xList List_t
#endif /* configENABLE_BACKWARD_COMPATIBILITY */
/* Set configUSE_TASK_FPU_SUPPORT to 0 to omit floating point support even
if floating point hardware is otherwise supported by the FreeRTOS port in use.
This constant is not supported by all FreeRTOS ports that include floating
point support. */
#ifndef configUSE_TASK_FPU_SUPPORT
#define configUSE_TASK_FPU_SUPPORT 1
#endif
#ifdef __cplusplus
}
#endif
#endif /* INC_FREERTOS_H */
crazyflie-firmware-src/src/lib/FreeRTOS/include/StackMacros.h deleted 100755 → 0
View file @ 6291d058
/*
FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd.
All rights reserved
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
***************************************************************************
>>! NOTE: The modification to the GPL is included to allow you to !<<
>>! distribute a combined work that includes FreeRTOS without being !<<
>>! obliged to provide the source code for proprietary components !<<
>>! outside of the FreeRTOS kernel. !<<
***************************************************************************
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Full license text is available on the following
link: http://www.freertos.org/a00114.html
***************************************************************************
* *
* FreeRTOS provides completely free yet professionally developed, *
* robust, strictly quality controlled, supported, and cross *
* platform software that is more than just the market leader, it *
* is the industry's de facto standard. *
* *
* Help yourself get started quickly while simultaneously helping *
* to support the FreeRTOS project by purchasing a FreeRTOS *
* tutorial book, reference manual, or both: *
* http://www.FreeRTOS.org/Documentation *
* *
***************************************************************************
http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
the FAQ page "My application does not run, what could be wrong?". Have you
defined configASSERT()?
http://www.FreeRTOS.org/support - In return for receiving this top quality
embedded software for free we request you assist our global community by
participating in the support forum.
http://www.FreeRTOS.org/training - Investing in training allows your team to
be as productive as possible as early as possible. Now you can receive
FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
Ltd, and the world's leading authority on the world's leading RTOS.
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
including FreeRTOS+Trace - an indispensable productivity tool, a DOS
compatible FAT file system, and our tiny thread aware UDP/IP stack.
http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
licenses offer ticketed support, indemnification and commercial middleware.
http://www.SafeRTOS.com - High Integrity Systems also provide a safety
engineered and independently SIL3 certified version for use in safety and
mission critical applications that require provable dependability.
1 tab == 4 spaces!
*/
#ifndef STACK_MACROS_H
#define STACK_MACROS_H
/*
* Call the stack overflow hook function if the stack of the task being swapped
* out is currently overflowed, or looks like it might have overflowed in the
* past.
*
* Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check
* the current stack state only - comparing the current top of stack value to
* the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1
* will also cause the last few stack bytes to be checked to ensure the value
* to which the bytes were set when the task was created have not been
* overwritten. Note this second test does not guarantee that an overflowed
* stack will always be recognised.
*/
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) )
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) )
/* Only the current stack state is to be checked. */
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
\
/* Is the currently saved stack pointer within the stack limit? */ \
if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack; \
const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5; \
\
if( ( pulStack[ 0 ] != ulCheckValue ) || \
( pulStack[ 1 ] != ulCheckValue ) || \
( pulStack[ 2 ] != ulCheckValue ) || \
( pulStack[ 3 ] != ulCheckValue ) ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
/*-----------------------------------------------------------*/
#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )
#define taskCHECK_FOR_STACK_OVERFLOW() \
{ \
int8_t *pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack; \
static const uint8_t ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \
\
\
pcEndOfStack -= sizeof( ucExpectedStackBytes ); \
\
/* Has the extremity of the task stack ever been written over? */ \
if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \
{ \
vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
} \
}
#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
/*-----------------------------------------------------------*/
/* Remove stack overflow macro if not being used. */
#ifndef taskCHECK_FOR_STACK_OVERFLOW
#define taskCHECK_FOR_STACK_OVERFLOW()
#endif
#endif /* STACK_MACROS_H */
crazyflie-firmware-src/src/lib/FreeRTOS/include/croutine.h deleted 100755 → 0
View file @ 6291d058
/*
FreeRTOS V8.2.3 - Copyright (C) 2015 Real Time Engineers Ltd.
All rights reserved
VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
***************************************************************************
>>! NOTE: The modification to the GPL is included to allow you to !<<
>>! distribute a combined work that includes FreeRTOS without being !<<
>>! obliged to provide the source code for proprietary components !<<
>>! outside of the FreeRTOS kernel. !<<
***************************************************************************
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. Full license text is available on the following
link: http://www.freertos.org/a00114.html
***************************************************************************
* *
* FreeRTOS provides completely free yet professionally developed, *
* robust, strictly quality controlled, supported, and cross *
* platform software that is more than just the market leader, it *
* is the industry's de facto standard. *
* *
* Help yourself get started quickly while simultaneously helping *
* to support the FreeRTOS project by purchasing a FreeRTOS *
* tutorial book, reference manual, or both: *
* http://www.FreeRTOS.org/Documentation *
* *
***************************************************************************
http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading
the FAQ page "My application does not run, what could be wrong?". Have you
defined configASSERT()?
http://www.FreeRTOS.org/support - In return for receiving this top quality
embedded software for free we request you assist our global community by
participating in the support forum.
http://www.FreeRTOS.org/training - Investing in training allows your team to
be as productive as possible as early as possible. Now you can receive
FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
Ltd, and the world's leading authority on the world's leading RTOS.
http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
including FreeRTOS+Trace - an indispensable productivity tool, a DOS
compatible FAT file system, and our tiny thread aware UDP/IP stack.
http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS
licenses offer ticketed support, indemnification and commercial middleware.
http://www.SafeRTOS.com - High Integrity Systems also provide a safety
engineered and independently SIL3 certified version for use in safety and
mission critical applications that require provable dependability.
1 tab == 4 spaces!
*/
#ifndef CO_ROUTINE_H
#define CO_ROUTINE_H
#ifndef INC_FREERTOS_H
#error "include FreeRTOS.h must appear in source files before include croutine.h"
#endif
#include "list.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Used to hide the implementation of the co-routine control block. The
control block structure however has to be included in the header due to
the macro implementation of the co-routine functionality. */
typedef void * CoRoutineHandle_t;
/* Defines the prototype to which co-routine functions must conform. */
typedef void (*crCOROUTINE_CODE)( CoRoutineHandle_t, UBaseType_t );
typedef struct corCoRoutineControlBlock
{
crCOROUTINE_CODE pxCoRoutineFunction;
ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */
ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */
UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */
UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
uint16_t uxState; /*< Used internally by the co-routine implementation. */
} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */
/**
* croutine. h
*<pre>
BaseType_t xCoRoutineCreate(
crCOROUTINE_CODE pxCoRoutineCode,
UBaseType_t uxPriority,
UBaseType_t uxIndex
);</pre>
*
* Create a new co-routine and add it to the list of co-routines that are
* ready to run.
*
* @param pxCoRoutineCode Pointer to the co-routine function. Co-routine
* functions require special syntax - see the co-routine section of the WEB
* documentation for more information.
*
* @param uxPriority The priority with respect to other co-routines at which
* the co-routine will run.
*
* @param uxIndex Used to distinguish between different co-routines that
* execute the same function. See the example below and the co-routine section
* of the WEB documentation for further information.
*
* @return pdPASS if the co-routine was successfully created and added to a ready
* list, otherwise an error code defined with ProjDefs.h.
*
* Example usage:
<pre>
// Co-routine to be created.
void vFlashCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
// This may not be necessary for const variables.
static const char cLedToFlash[ 2 ] = { 5, 6 };
static const TickType_t uxFlashRates[ 2 ] = { 200, 400 };
// Must start every co-routine with a call to crSTART();
crSTART( xHandle );
for( ;; )
{
// This co-routine just delays for a fixed period, then toggles
// an LED. Two co-routines are created using this function, so
// the uxIndex parameter is used to tell the co-routine which
// LED to flash and how int32_t to delay. This assumes xQueue has
// already been created.
vParTestToggleLED( cLedToFlash[ uxIndex ] );
crDELAY( xHandle, uxFlashRates[ uxIndex ] );
}
// Must end every co-routine with a call to crEND();
crEND();
}
// Function that creates two co-routines.
void vOtherFunction( void )
{
uint8_t ucParameterToPass;
TaskHandle_t xHandle;
// Create two co-routines at priority 0. The first is given index 0
// so (from the code above) toggles LED 5 every 200 ticks. The second
// is given index 1 so toggles LED 6 every 400 ticks.
for( uxIndex = 0; uxIndex < 2; uxIndex++ )
{
xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
}
}
</pre>
* \defgroup xCoRoutineCreate xCoRoutineCreate
* \ingroup Tasks
*/
BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex );
/**
* croutine. h
*<pre>
void vCoRoutineSchedule( void );</pre>
*
* Run a co-routine.
*
* vCoRoutineSchedule() executes the highest priority co-routine that is able
* to run. The co-routine will execute until it either blocks, yields or is
* preempted by a task. Co-routines execute cooperatively so one
* co-routine cannot be preempted by another, but can be preempted by a task.
*
* If an application comprises of both tasks and co-routines then
* vCoRoutineSchedule should be called from the idle task (in an idle task
* hook).
*
* Example usage:
<pre>
// This idle task hook will schedule a co-routine each time it is called.
// The rest of the idle task will execute between co-routine calls.
void vApplicationIdleHook( void )
{
vCoRoutineSchedule();
}
// Alternatively, if you do not require any other part of the idle task to
// execute, the idle task hook can call vCoRoutineScheduler() within an
// infinite loop.
void vApplicationIdleHook( void )
{
for( ;; )
{
vCoRoutineSchedule();
}
}
</pre>
* \defgroup vCoRoutineSchedule vCoRoutineSchedule
* \ingroup Tasks
*/
void vCoRoutineSchedule( void );
/**
* croutine. h
* <pre>
crSTART( CoRoutineHandle_t xHandle );</pre>
*
* This macro MUST always be called at the start of a co-routine function.
*
* Example usage:
<pre>
// Co-routine to be created.
void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
static int32_t ulAVariable;
// Must start every co-routine with a call to crSTART();
crSTART( xHandle );
for( ;; )
{
// Co-routine functionality goes here.
}
// Must end every co-routine with a call to crEND();
crEND();
}</pre>
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crSTART( pxCRCB ) switch( ( ( CRCB_t * )( pxCRCB ) )->uxState ) { case 0:
/**
* croutine. h
* <pre>
crEND();</pre>
*
* This macro MUST always be called at the end of a co-routine function.
*
* Example usage:
<pre>
// Co-routine to be created.
void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
static int32_t ulAVariable;
// Must start every co-routine with a call to crSTART();
crSTART( xHandle );
for( ;; )
{
// Co-routine functionality goes here.
}
// Must end every co-routine with a call to crEND();
crEND();
}</pre>
* \defgroup crSTART crSTART
* \ingroup Tasks
*/
#define crEND() }
/*
* These macros are intended for internal use by the co-routine implementation
* only. The macros should not be used directly by application writers.
*/
#define crSET_STATE0( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = (__LINE__ * 2); return; case (__LINE__ * 2):
#define crSET_STATE1( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = ((__LINE__ * 2)+1); return; case ((__LINE__ * 2)+1):
/**
* croutine. h
*<pre>
crDELAY( CoRoutineHandle_t xHandle, TickType_t xTicksToDelay );</pre>
*
* Delay a co-routine for a fixed period of time.
*
* crDELAY can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* @param xHandle The handle of the co-routine to delay. This is the xHandle
* parameter of the co-routine function.
*
* @param xTickToDelay The number of ticks that the co-routine should delay
* for. The actual amount of time this equates to is defined by
* configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_PERIOD_MS
* can be used to convert ticks to milliseconds.
*
* Example usage:
<pre>
// Co-routine to be created.
void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
// This may not be necessary for const variables.
// We are to delay for 200ms.
static const xTickType xDelayTime = 200 / portTICK_PERIOD_MS;
// Must start every co-routine with a call to crSTART();
crSTART( xHandle );
for( ;; )
{
// Delay for 200ms.
crDELAY( xHandle, xDelayTime );
// Do something here.
}
// Must end every co-routine with a call to crEND();
crEND();
}</pre>
* \defgroup crDELAY crDELAY
* \ingroup Tasks
*/
#define crDELAY( xHandle, xTicksToDelay ) \
if( ( xTicksToDelay ) > 0 ) \
{ \
vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \
} \
crSET_STATE0( ( xHandle ) );
/**
* <pre>
crQUEUE_SEND(
CoRoutineHandle_t xHandle,
QueueHandle_t pxQueue,
void *pvItemToQueue,
TickType_t xTicksToWait,
BaseType_t *pxResult
)</pre>
*
* The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
* equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
*
* crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
* xQueueSend() and xQueueReceive() can only be used from tasks.
*
* crQUEUE_SEND can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xHandle The handle of the calling co-routine. This is the xHandle
* parameter of the co-routine function.
*
* @param pxQueue The handle of the queue on which the data will be posted.
* The handle is obtained as the return value when the queue is created using
* the xQueueCreate() API function.
*
* @param pvItemToQueue A pointer to the data being posted onto the queue.
* The number of bytes of each queued item is specified when the queue is
* created. This number of bytes is copied from pvItemToQueue into the queue
* itself.
*
* @param xTickToDelay The number of ticks that the co-routine should block
* to wait for space to become available on the queue, should space not be
* available immediately. The actual amount of time this equates to is defined
* by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
* portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see example
* below).
*
* @param pxResult The variable pointed to by pxResult will be set to pdPASS if
* data was successfully posted onto the queue, otherwise it will be set to an
* error defined within ProjDefs.h.
*
* Example usage:
<pre>
// Co-routine function that blocks for a fixed period then posts a number onto
// a queue.
static void prvCoRoutineFlashTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
static BaseType_t xNumberToPost = 0;
static BaseType_t xResult;
// Co-routines must begin with a call to crSTART().
crSTART( xHandle );
for( ;; )
{
// This assumes the queue has already been created.
crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
if( xResult != pdPASS )
{
// The message was not posted!
}
// Increment the number to be posted onto the queue.
xNumberToPost++;
// Delay for 100 ticks.
crDELAY( xHandle, 100 );
}
// Co-routines must end with a call to crEND().
crEND();
}</pre>
* \defgroup crQUEUE_SEND crQUEUE_SEND
* \ingroup Tasks
*/
#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRSend( ( pxQueue) , ( pvItemToQueue) , ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \
} \
if( *pxResult == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*pxResult = pdPASS; \
} \
}
/**
* croutine. h
* <pre>
crQUEUE_RECEIVE(
CoRoutineHandle_t xHandle,
QueueHandle_t pxQueue,
void *pvBuffer,
TickType_t xTicksToWait,
BaseType_t *pxResult
)</pre>
*
* The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
* equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
*
* crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
* xQueueSend() and xQueueReceive() can only be used from tasks.
*
* crQUEUE_RECEIVE can only be called from the co-routine function itself - not
* from within a function called by the co-routine function. This is because
* co-routines do not maintain their own stack.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xHandle The handle of the calling co-routine. This is the xHandle
* parameter of the co-routine function.
*
* @param pxQueue The handle of the queue from which the data will be received.
* The handle is obtained as the return value when the queue is created using
* the xQueueCreate() API function.
*
* @param pvBuffer The buffer into which the received item is to be copied.
* The number of bytes of each queued item is specified when the queue is
* created. This number of bytes is copied into pvBuffer.
*
* @param xTickToDelay The number of ticks that the co-routine should block
* to wait for data to become available from the queue, should data not be
* available immediately. The actual amount of time this equates to is defined
* by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
* portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see the
* crQUEUE_SEND example).
*
* @param pxResult The variable pointed to by pxResult will be set to pdPASS if
* data was successfully retrieved from the queue, otherwise it will be set to
* an error code as defined within ProjDefs.h.
*
* Example usage:
<pre>
// A co-routine receives the number of an LED to flash from a queue. It
// blocks on the queue until the number is received.
static void prvCoRoutineFlashWorkTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// Variables in co-routines must be declared static if they must maintain value across a blocking call.
static BaseType_t xResult;
static UBaseType_t uxLEDToFlash;
// All co-routines must start with a call to crSTART().
crSTART( xHandle );
for( ;; )
{
// Wait for data to become available on the queue.
crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
if( xResult == pdPASS )
{
// We received the LED to flash - flash it!
vParTestToggleLED( uxLEDToFlash );
}
}
crEND();
}</pre>
* \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
{ \
*( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), ( xTicksToWait ) ); \
if( *( pxResult ) == errQUEUE_BLOCKED ) \
{ \
crSET_STATE0( ( xHandle ) ); \
*( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), 0 ); \
} \
if( *( pxResult ) == errQUEUE_YIELD ) \
{ \
crSET_STATE1( ( xHandle ) ); \
*( pxResult ) = pdPASS; \
} \
}
/**
* croutine. h
* <pre>
crQUEUE_SEND_FROM_ISR(
QueueHandle_t pxQueue,
void *pvItemToQueue,
BaseType_t xCoRoutinePreviouslyWoken
)</pre>
*
* The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
* co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
* functions used by tasks.
*
* crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
* pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
* xQueueReceiveFromISR() can only be used to pass data between a task and and
* ISR.
*
* crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue
* that is being used from within a co-routine.
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xQueue The handle to the queue on which the item is to be posted.
*
* @param pvItemToQueue A pointer to the item that is to be placed on the
* queue. The size of the items the queue will hold was defined when the
* queue was created, so this many bytes will be copied from pvItemToQueue
* into the queue storage area.
*
* @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto
* the same queue multiple times from a single interrupt. The first call
* should always pass in pdFALSE. Subsequent calls should pass in
* the value returned from the previous call.
*
* @return pdTRUE if a co-routine was woken by posting onto the queue. This is
* used by the ISR to determine if a context switch may be required following
* the ISR.
*
* Example usage:
<pre>
// A co-routine that blocks on a queue waiting for characters to be received.
static void vReceivingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
char cRxedChar;
BaseType_t xResult;
// All co-routines must start with a call to crSTART().
crSTART( xHandle );
for( ;; )
{
// Wait for data to become available on the queue. This assumes the
// queue xCommsRxQueue has already been created!
crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
// Was a character received?
if( xResult == pdPASS )
{
// Process the character here.
}
}
// All co-routines must end with a call to crEND().
crEND();
}
// An ISR that uses a queue to send characters received on a serial port to
// a co-routine.
void vUART_ISR( void )
{
char cRxedChar;
BaseType_t xCRWokenByPost = pdFALSE;
// We loop around reading characters until there are none left in the UART.
while( UART_RX_REG_NOT_EMPTY() )
{
// Obtain the character from the UART.
cRxedChar = UART_RX_REG;
// Post the character onto a queue. xCRWokenByPost will be pdFALSE
// the first time around the loop. If the post causes a co-routine
// to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
// In this manner we can ensure that if more than one co-routine is
// blocked on the queue only one is woken by this ISR no matter how
// many characters are posted to the queue.
xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
}
}</pre>
* \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) )
/**
* croutine. h
* <pre>
crQUEUE_SEND_FROM_ISR(
QueueHandle_t pxQueue,
void *pvBuffer,
BaseType_t * pxCoRoutineWoken
)</pre>
*
* The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
* co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
* functions used by tasks.
*
* crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
* pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
* xQueueReceiveFromISR() can only be used to pass data between a task and and
* ISR.
*
* crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data
* from a queue that is being used from within a co-routine (a co-routine
* posted to the queue).
*
* See the co-routine section of the WEB documentation for information on
* passing data between tasks and co-routines and between ISR's and
* co-routines.
*
* @param xQueue The handle to the queue on which the item is to be posted.
*
* @param pvBuffer A pointer to a buffer into which the received item will be
* placed. The size of the items the queue will hold was defined when the
* queue was created, so this many bytes will be copied from the queue into
* pvBuffer.
*
* @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become
* available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a
* co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise
* *pxCoRoutineWoken will remain unchanged.
*
* @return pdTRUE an item was successfully received from the queue, otherwise
* pdFALSE.
*
* Example usage:
<pre>
// A co-routine that posts a character to a queue then blocks for a fixed
// period. The character is incremented each time.
static void vSendingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
{
// cChar holds its value while this co-routine is blocked and must therefore
// be declared static.
static char cCharToTx = 'a';
BaseType_t xResult;
// All co-routines must start with a call to crSTART().
crSTART( xHandle );
for( ;; )
{
// Send the next character to the queue.
crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
if( xResult == pdPASS )
{
// The character was successfully posted to the queue.
}
else
{
// Could not post the character to the queue.
}
// Enable the UART Tx interrupt to cause an interrupt in this
// hypothetical UART. The interrupt will obtain the character
// from the queue and send it.
ENABLE_RX_INTERRUPT();
// Increment to the next character then block for a fixed period.
// cCharToTx will maintain its value across the delay as it is
// declared static.
cCharToTx++;
if( cCharToTx > 'x' )
{
cCharToTx = 'a';
}
crDELAY( 100 );
}
// All co-routines must end with a call to crEND().
crEND();
}
// An ISR that uses a queue to receive characters to send on a UART.
void vUART_ISR( void )
{
char cCharToTx;
BaseType_t xCRWokenByPost = pdFALSE;
while( UART_TX_REG_EMPTY() )
{
// Are there any characters in the queue waiting to be sent?
// xCRWokenByPost will automatically be set to pdTRUE if a co-routine
// is woken by the post - ensuring that only a single co-routine is
// woken no matter how many times we go around this loop.
if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
{
SEND_CHARACTER( cCharToTx );
}
}
}</pre>
* \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR
* \ingroup Tasks
*/
#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) )
/*
* This function is intended for internal use by the co-routine macros only.
* The macro nature of the co-routine implementation requires that the
* prototype appears here. The function should not be used by application
* writers.
*
* Removes the current co-routine from its ready list and places it in the
* appropriate delayed list.
*/
void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList );
/*
* This function is intended for internal use by the queue implementation only.
* The function should not be used by application writers.
*
* Removes the highest priority co-routine from the event list and places it in
* the pending ready list.
*/
BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList );
#ifdef __cplusplus
}
#endif
#endif /* CO_ROUTINE_H */